- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
that is the sensor that reads the speed of the turbine in the torque converter
it reports to the TCM and ratio sensor for smooth and appropriate changes
Take it to a profession auto transmission shop for a proper diagnosis and quote
Have to check the speed sensor. Either the speed sensor is faulty or the can be dust or speed sensor alignment.
If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/
You must try a) LUBE very well the Deck belt and walking belt b) Recalibrate the machine.
If after this situation persist.
You must replace the EPROM(software is coming inside, and can be corrupt), call to the company.
for to get it.
Blessing. How To Lubricate Treadmill [email protected]
cell+whatsAPP:+50588611441
The overdrive solenoid in the transmission locks the torque converter, and at low speeds, if it activates or hasn't released from a high enough speed, it will cause stalling. If that is what's happening, it could be the solenoid, or the signal line to it from the ECM, or the ECM itself not working properly.
Yes you may be able to recalabrate the machine. A grade stall is when the machine does bot think the machine is at the right height. A bad lower board can also be the problem. True has those treadmills brought overseas. There not the american made quality of the units they useto make in MO.
×