How to enable icmp on netgear router wgr614 - NetGear WGR614 Wireless Router

SOURCE: connection settings for a ps3 via netgear WGR614

you need to check your routers firewall setting by accessing your router through the pc and make sure your plug and play settings are enabled. all can be found on the router setup page. the playstation only requires you to enter the WPSK or WPA wireless encryption key to log on so the problem is usually with the router....hope this helps.

SOURCE: NETGEAR WGR614 Wireless Router keeps beeping

try by upgrading the latest firmware version from netgear website

SOURCE: how to add a netgear wgr614 router to dsl modem

The NETGEAR router needs to be configured. Call NETGEAR. Try this also http://technicalsupport.blog.friendster.com

SOURCE: Netgear WGR614 Router won't configure to 64 bit Vista

If it's a new router read the book with it and it will tell you how to access the router via internet explorer. Something like this, on the address line of IE enter //192.168.0.1 and type enter. You will need the default login and password from the manual.