No voice from headset despite connected - Motorola Mobility H730 Bluetooth Headset

The HX550 does not have language settings you can only turn on/off the Voice Prompts, you can also check for the Voice prompts option by doing the steps below..Press and hold the Call button while turning on the
headset to turn these features on/off:

• Reset to factory default
Caution: This action erases all pairing information
stored in your headset.
• Caller ID
• Voice prompts
• Multipoint (two phone) connections
• WBS (Wide-band Audio) on/off

Follow the voice prompts to make changes to these
settings.
Note: Some features are phone/network dependent.

Mark
Motorola Support
https://forums.motorola.com/pages/home

Hi. To turn Voice Guidance off, press the Option button. To find the settings, press up or down slowly until you hear a beep. Press OK to enter the voice guidance menu. From that his menu: Voice Guidance On/Off: Use arrow keys on remote to toggle on and off. NOTE:This menu is spoken even when voice guidance is turned off.

Read more: Turn off voice guidance Jabra extreme 2? - Software to turn off voice guidance of jabra extreme 2 :: Ask Me Fast at

Poor signal strength

If you cannot hear the voice eventhough it is connected, do as follows:
• Ensure that the headset is charged, switched on, and paired with and
connected to your phone.
• Ensure that the Bluetooth feature is activated on your phone.
• Check that the headset is within 10 meters (30 feet) of your phone and
that there are no obstructions between the headset and the phone,
such as walls or other electronic devices.
• To reset the headset if it stops functioning, although it is charged, plug
the headset into a charger, and briefly press the power key and the
middle of the volume key. This reset does not clear your settings (for
example, pairing settings).

please dont forget to rate me.....

Good luck....

Nokia uses a different type of connector configuration.

You must use a headset that is makde for Nokia only.
Also, a Nokia headset will not work with any other cellphone brand..

===sorry=====

From what I understand, once your device is paired you have to go to Audio Device Settings > Input device > select "your headset" > output device > select "your headset. Then click "Connect Bluetooth" icon. Then OK. That should do it.

Are you sure the phone is voice command capable? To set up on the phone you must follow commands to repeat several letters, numbers & words. If you have done that then push the button on the headset & you should hear "say a command".

Delete the plantronics from your phone, take out the battery from your phone for 10secs then replace the battery and search for your headset again. worked for me.

just purchased Nokia 6300 cell phone and connected it with my bluetooth headset Samsung Wep200. As my new phone has advanced voice call, everytime the headset's button gets pressed accidentally even once and someone is talking, it starts calling on it's own. Is there any way to disarm the advanced voice calling? Have the same problem? Click Here

Hi, A couple of things you can check first pls: 1. the logitech headset has its own mute control somewhere along the line/volume control. pls check/try it on both settings; 2. since it is USB connected, it is now a secondary audio device in your hardware aside from the onboard audio device in your computer. That gives you now 2 speaker output and 2 mic inputs. It is possible that voice recognition uses the logitech therefore it works but voice chat uses the onboard audio and since no mic is connected at the rear of your computer (I am presuming), you may have to set the voice chat to use the logitech mike also. I hope this gives you some idea and works for you. Pls post agin how things are or if you still need further assistance. Good luck and kind regards.