Bluetooth code lost my telephone with the new phone he is asking for a pinccode when i try to add my phone to bleutooth, is there a standaard code does anybode has a code i can try

Sorry, that car is not equiped with bluetooth. Jaguar cars started with bluetooth around 2004.

Check out this link on your bluetooth headset.  Make sure you have your headset in discover mode.

 

https://www.samsungmobileusa.com/myplanetbluetooth//resources/specsheets/WEP460_SS.pdf

Try finding the stereo (registering) with the phone.Go to Bluetooth, add device.

turn your headset on and hold the button down until it starts flashing blue and red. go to setting on your phone bluetooth and choose add new device or pair device.
your phone will pik up the new bluetooth and ask for a password it is usually 0000 or 1234

If you need a copy of the instruction page, I can send you a pdf. [email protected]



Pairing your headset and cellular telephone:
1. Ensure that the headset is off.
2. Press and hold the multifunction button until the indicator light
turns on in blue (approx.8 seconds).
3. Set your Bluetooth-Compatible Phone to discover the headset by
following your phone's guide.
4. Typically, the steps involve going to a "setup"connect" or
"Bluetooth" menu option on your phone.
5. Select the option to locate, find or discover Bluetooth devices.
6. Press and hold the multifunction button on the Wireless Headset
until your cellular phone locates the device.
7.Your phone will find "-PBH-8W" and ask if you want to pair with it.
Confirm by pressing Yes or OK.
8.Your phone may ask for the password to the headset. Enter
"0000" (four zeros) for the code or passkey
9.Your wireless device will operate up to 30 feet from the wireless
telephone.

TECHNICAL ASSISTANCE:
Contact GNBI: [email protected]
Telephone # 1-800-541-GNBI (4624)
Reference # PBH-8W

Found this at another site. It worked for me. Good luck!!


Back to the phone, you want to hit "add new device". On certain models of phone you additionally have to select "search for devices". Your phone will recognize any headsets in pairing mode. When it is finished scanning, allow the phone to add your headset. It will ask you for the device pin code. This pin code will be 0000.

Tab start then communication manager and tab bluetooth.Then tab x.go again start-settings.tab connections-bleutooth and and make sure tha the bleutooth is turned on tick the device visible to other devices.tab x.Then start and tab internet explorer . Your mobile start searching for a device.thats it.

to add this other phone to your bluetooth ou both have to enter the same passcode so it knows that both people want to be on each others bluetooth just enter 0000 and tell whosever bluetooth you want to enter the same number.

Install printer as a network(TCP/IP) printer instead of LPT1.

the bluetooth code would be based upon what you tell your phone to ask the computer for. Usually when you pair the computer is the one that gives you the option to set a code. I would recommend setting it on your own to 0000. And vice versa for the phone. Either way it is supposed to give you an option for setting your own code for the pair.