Printing blank printing or copying blanks with error code p9 and p21

Registration errors. Have tech come out clean IDC sensors and replace black i/u

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

You remove the PRINT HEAD????? DID YOU FOLLOW THE Service manual????????? Well you caused your own problem now you need to do a alignment. of the colors. you also might check the ribbon cable you removed and all the connectors you played with and check each one is secured. Recommend you don't ever remove the print head which houses the LASER unless you follow the service manual. Well you need to get to service mode and run registration procedures. try this site for a service manual or better yey have tech come out and run the required checks.


Service manuals electronic components datasheets and equipment schematics...

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

mayby cardridges are empty

check The Transfer Belt or it can be the Black Image Unit . (P9 & P21 normally: black Imaging unit) but P21 can also be refered to Transfer Belt). ..

Replace the black drum and black developer unit P-9 Black drum issue and P21 registration issue since black is used as the reference for registration of colors can see a P-9 and P-21 code combo. Precision Roller Printer Toner Cartridges Parts and Supplies Office...

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

try to go to your printers and faxes it is located in the start menu.

you have a registration error , which will require removable of the transfer belt and cleaning of the sensors below the transfer belt

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

sir, You have a registration error , which will require removable of the transfer belt and cleaning of the sensors below the transfer belt, recommended a tech do it

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

you need to replace the image units Black cyan yellow and magenta

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

hi piz Error code P9 and P21 appears on screen and when printing or photocopying using color black, blank copies are outputed