Question about Canon MVX20I Mini DV Digital Camcorder
Battery pack is new; camera has not been used for 4 years. Nothing happens when I put (charged) battery pack and turn on the camera
If your battery does not seem to charge, then you need to carry out some tests on the device, the battery and the charger. First you insert the battery into another cam corder then you try to charge, if it charges, then it means the battery is okay and if it does not charge, then it means the battery is bad and need to be replaced.
Then i will advice you take the charger and try to charge another device to see if it will work, if it works, then it means the charger is alright but if it does not then it means the charger is bad and need to be replaced.
Finally, test the camcorder by plugging a well tested charger and battery into it and trying to charge it, if it does not charge then the problem is from the camcorder.
Posted on Feb 12, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
This incident happens often and damages the camcorder's power board. Replacing power board and some adjustment should resolved the problem. Your cost may run from $175-$225 in US for this model. Whenever you are transfering and connecting to pc, it is recommended to connect AC adapter power for this. Do not rely on a charged battery. Good luck.
Posted on Mar 18, 2007
If you don't use the battery for a long period of time even a new battery may become dead. You can try a new battery. If it still doesn't work then the problem is with the charging IC. u can also try a desktop charger instead of direct charger.
Posted on Mar 05, 2013
Tips for a great answer:
iIt seems that the battery is low or not powerful enough to run the camera properly. when the camera notices there is not enough power it will automatically shut down. ensure the battery is fully charged up on the charger and then try it. the battery type is
Canon NB-3L and if the camera is a few years old or has been stored for a long time the battery may need to be replaced.
if all these have been done and still the problem persists i would recommend a dealer have a look at the camera.
to replace battery open slider plate on bottom of camera and flip tab to release the battery pack.
I hope this was useful.
May 28, 2014 | Canon PowerShot A495 Digital Camera
Jan 22, 2013 | Nikon D80 Digital Camera
Jan 14, 2011 | Sony Handycam DCR-VX1000 Mini DV Digital...
Dec 20, 2010 | Sony Handycam CCD-TRV108 Camcorder
May 13, 2010 | Kodak EasyShare Z712 Digital Camera
Feb 28, 2010 | Olympus FE-190 Digital Camera
Jan 09, 2009 | Pure Digital Flip Video Ultra Camcorder
Aug 16, 2008 | Cameras
May 27, 2008 | Canon PowerShot SD750 / IXUS 75 Digital...
Oct 23, 2007 | Metz 60CT-1 Flash
Sep 13, 2019 | Sony Video Cameras
218 people viewed this question
Usually answered in minutes!