OLD REMOTE NEEDS PROGRAMING

https://www.google.com/search?sxsrf=ALeKk01WXYf7C0T8rMi9ZryD8CeMY45YWA%3A1585158210467&source=hp&ei=Qph7XtDvGYfNrgSHh6gI&q=how+we+program+my+Philips+universal+remote+for+my+Orion+TV+don%27t+know+how+old+the+remote+is&oq=how+we+program+my+Philips+universal+remote+for+my+Orion+TV+don%27t+know+how+old+the+remote+is&gs_l=psy-ab.3...3099.23401..26745...4.0..0.630.5472.2-2j5j6j1......0....2j1..gws-wiz.....10..35i362i39j35i39j35i304i39.VpH5PWtMe7o&ved=0ahUKEwjQmK7AlrboAhWHposKHYcDCgEQ4dUDCAU&uact=5#kpvalbx=_vpl7Xo-YI4SR8gLWqqDQBw37

don't waste money on a universal unless you just want on/off, get a original that will have all the features and no programing needed, among other places look on Ebay.

Hi, I don't know what TV you are using this remote for but if you still have access to the owners manual, it should include programing instructions for this remote if it is the one that came with your TV. If you don't have the TV manual, you should be able to search on Google and download it off the internet.

Hope this helps,

Gil

As far i can tell,u said the tv u unpluging,repluging the tv back awhile later the tv will function and work is that correct?Yes,this problems,alway related to the tv power supply board,that the board where the tv power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.U said u tried programing the remote,is the remote u have and using is a universal remote,u don't have the tv original remote?Yes,try website like Remotes.com to buy the tv original remote too.

U have the tv original remote?Look for a button said Input,used that button push it to goes into video mode 1 or 2.Don't have the tv original reomote.Try website like Remotes.com to buy the tv original remote.

fifty is cheap and should pay it because no else can program the remote because it must be done through the computer.

Not fixed,,only needs programing from manuel...G

I can not remember the nu mbers to program in the TV for the remote. I can turn on the VCR but not the TV. I know it is somehting simple like s ymbol/2 or 4/tv but it has not been working

jenson 300 series Sony tv codes 497,491,475,459,406 or the code you have
hold the program or setup button untill it blinks. select the tv function and enter the code you have or one i listed above then enter

Or if your remote is this 300c series your code would be 0000
you would press down and release the device"mode key"tv,vcr,ect
the red light will blink once.press and hold down the setup key untill red light blinks twice then release.enter the code the led light will blink once on each digit execpt the last one will blink twice to confirm valid code ****mode 1 is for the tv on this remote.

hope this helps

u lost hi volts. bulb most likely