Code error E00013-0000 sur ir 5570 - Lanier 5222/27 Laser Printer

If you wish to get more details, check this site. Pull up previous posts there. Setup code list and setup proceedings to many popular brand remote controls are given. Three digit, four digit, five digits and two-digit code list are there. Check the site with patience. Surely you'll get a solution to your problem. Search the site by 'Timeslide' option. It will make search easy. Or, type in the brand name to your device into its search box, and press "Enter"

Code
E061-0002
Description
There is a potential control error/there is an APC error.
The primary charging output used at time of printer output and the drum surface potential after laser output is identified as being 200 V or more (i.e., causing a solid black image).
Remedy
- Replace the potential sensor unit. - Replace the laser scanner unit. - Replace the DC controller PCB.

you have to replace laser unit.

CCD expose not work well.

solution E000840-0001...????

check the toner bottle.place it properly and lock properly if still error code appears check bttle drive assembly and motor.

hallooo ... sp,
what's the difference with the IR5570 IR 6570 .. thanks

press ad.funct. then press 2 & 8 keys at the same time,
then press ad. funct. , copier display shows setup mode go to (function)
tab and press clear error.

there is a toner feed motor over currente detection error, there is a toner botle motor connection detection error.
1- check the connector for any fault in connection.
2- replace the motor