Vibration shock absorber

It's possible that your front loaded washing machine is experiencing an unbalanced load or there could be an issue with the motor or drum bearings. Here are a few things you can try:

1. Check the load: Make sure that the clothes are distributed evenly in the drum. An unbalanced load can cause the machine to shake and stop mid-cycle.
2. Check the shock absorbers: If the shock absorbers are worn out or damaged, they may not be able to absorb the vibrations caused by the high-speed spin cycle. If this is the case, the machine will need to be repaired or the shock absorbers replaced.
3. Check the motor and drum bearings: If the machine is making a loud noise or is vibrating excessively during the spin cycle, it's possible that there is an issue with the motor or drum bearings. This will require a professional repair.
4. Check the control board: If none of the above solutions work, it's possible that there is an issue with the control board. This will also require a professional repair.

If you're unsure of what the issue is or how to fix it, it's best to contact a professional repair service. They will be able to diagnose and repair the issue for you.

this may have something to do with worn suspension and steering joints. If the mechanic didn't tell you about the condition of the front end when he did the shock absorbers then be a little sus when you go back.

Hi Pradip,
The reason for this problem may be because of you chain sprocket, check if its placed tightly, Also check your Bore Piston.

umm yeah..

this video will show you

Because front load washers are VERY HEAVY, they shake if you have a wooden floor. If your front loader sits on concrete and it still shakes, then you have to make sure all is balanced. If it still shakes, then inside the system there are shock absorbers that need to be checked.

Check the Vibration damper rods to be sure that...
1. They are there and mount is solid.
2. If they are broken in 1/2.
3. The plastic knuckle mounts are not missing/broken.
4. There is oil in the shock absorber/spring section of the rods.

Also - there are suspension springs on the bottom of the tub that could be broken and/or missing.

Replace/repair as necessary.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

y shaped piece that contains the spindle that attatches to the basket and allows it to spin is corroded and cracking. you can't buy just the spindle bracket, you must buy the basket too. you'll be buying the front part of the drum too, if you wait to long.

kyb shocks ar the best thats all we use also check the "ruber" on the top make sure it is compresed together any gaps cause the " bump or pounding" noise