Light not working - Adidas Candy Digital watch

battery could be low, i have had a similar thing happen with a large face rip curl watch, works fine until you press the light button, theres not enough current left to run the face and the light. mine was almost new too, so even if you just got it it could be that!

looking for the owners manual to the casio edific EFR-513sp watch

Pop off the back and pull out batteries then put batteries back in and if dousnt work replace batteries

hi, I have the same watch/same problem, have you had any luck with yours?

Eco-drive watch should work for 1 year out of light. Take it out of the drawer and place in light, and check that the pin on the side is pushed in all the way.

This is a solar powered watch. I have placed mine under an incandescent light over night and it has started working again. Fluorescent light will not work. It needs to be out in the light whenever possible.

I fixed my problem by pulling the crown out to position 2 and then put it in the light, cause I tried to put it in the light without pulling out the crown but it would not charge

The brake light switch should be adjustable in as much as you can screw the switch holder around until it is the required distance from the brake pedal - the switch holder should have a locking nut, which requires undoing first then locking back once you have obtained satisfactory adjustment,thats assuming that the switch itself isn't broken or faulty.

I suggest you have to check your battery first. It may be underpowered. Replace it with the new one and then check light again.

check to make sure the button is making contact with the circuit board. It may need to be adjusted. Try and manually make contact with the copper contact. If it lights, then just adjust the tab.