Steam not working - Jura Capresso Impressa S9 Coffee Maker/Espresso Machine

If it is brand new, check there is water in it, and if there is, empty it and claim on warranty.

If it is new to you but secondhand, try descaling it with CLR.

Ideas here

https://www.google.com/search?q=Russell+Hobbs+Floor+Steam+Cleaner+RHSM1001-G-AZ.+worked+for+1+minute+and+then+stopped+steaming

..

If the temperature dial is not set high enough, or the thermostat is faulty and setting the cut-off temperature too low, some steam irons will fill up their steam chamber in their soleplates completely with water and stop steaming, until the temperature returns above what's needed to continously generate steam.

Steam Iron Not Working ' ThriftyFun

www.thriftyfun.com/Steam-Iron-Not-Working-1.html

Sep 4, 2013 - Here are questions related to Steam Iron Not Working. ... Why is my mini steam iron not working, after reaching 20 pounds of pressure? How do ...

My iron does not produce any steam - Philips

https://www.philips.co.uk/e/.../iron-does-not-produce-steam.html

PhilipsThe steam control may have been set to zero steam position. 2. There is no water in the tank and/ or the settings are not set correctly. 3. The steam vents of the ...

GC1015/31 Philips Steam iron GC1015 - Philips Support

Try this push in on the steam knob after it is turned on if that works the steam valve assembly needs to be replaced.

Blockage " mineral deposits" get a de-scalar and follow the directions. Only use distilled water in steam iron.
Sometimes vinegar will work depending on mineral deposits causing blockage.

Steam pump not on/ turn it on

hi! Long time listner, first time caller.

Iron not steaming AT ALL.

I have a tefal gv 7096

It turned on, all lights working and i can hear it heating up and when opening the calcium deposit i can see steam.

When i pressed the button - nothing. The iron it's self is hot (the plate) the lights on and but no steam.

The cord connecting the iron to the steam was also cold, so i could tell no steam was getting to the iron at all.

I wasn't sure if it was the button not working or something clogging the cord to the iron.

I did the vinegar thing. Let it sit for sometime (40 mins) and still nothing.
I did a weird thing of very carefully putting water on the plate while hot and it created steam from the plate. i think some backflowed and it started steaming, within seconds. might have happened with a bit more time anyway, but it def helped. All wokring fine now :)

descale it

Hi,

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the Shark Manuals that you need.

heatman101


j

Can you remove the steam button if you can fill with water heat to maximum and holding over sink remove steam button rod this will clean the steam traks but be careful this gets very hot.

Thanks J