Reebok Vista Treadmill issue

Just so you know, we aren't Rebook we are Fixya and just have a Reebok category for filing questions.

Videos showing how they work.

Hi,

if the machine slows down when you get on it, there might be a motor issue or problem with a bad circuit within the treadmill.

Thank you.

The Twitter article has the fix with an image of where the issue is.

https://www.google.com/search?q=error+code+E13+on+a+reebok+Jet300+treadmill


..

Question moved from Computers and Internet.

Try a Power Reset.

How do I Repair a Reebok Treadmill? - eHow UK

https://www.ehow.co.uk > how_7313278_do-repair-ree...
Locate the power switch on the Reebok treadmill. It is near the power cord on the frame of the treadmill. Press the power reset button and wait five minutes ...

How to Troubleshoot My Reebok Treadmill - SportsRec

https://www.sportsrec.com > Fitness > Cardio
Reebok treadmills are made to maximize your exercise experience. ... you can browse the troubleshooting tips in your user manual to rectify the situation.

What to do when Your Reebok treadmill is not working?

https://idswater.com > 2020/11/17 > what-to-do-when-y...
Nov 17, 2020 - When done the treadmill will perform the reset. Sole Fitness - Press the stop button to ensure nothing is running on the machine.

https://www.youtube.com/watch?v=a2FCo3JTO00
E02 error code: control board or motor issue. Test the motor first to check if the motor can runing normally. If motor is normal, replace the control board. E03 error code: 1,Turn on the treadmill , motor running a few seconds then stop and console board shows E03, probably the Speed sensor issue.
https://anytreadmillparts.com/pages/treadmill-error-code-troubleshooting

Check this link for the manual of this treadmill:

Reebok 8400c Treadmill Manual

Treadmill Lights Up But Fan And Belt Wont Run

http://www.youtube.com/watch?v=23ZgWaVEQjA (sensor speed) Test.

Watch this videos tips:
http://www.youtube.com/watch?v=qgb2TY3WCkg&feature=related
http://www.youtube.com/watch?v=-oeXTKqWECw&feature=related
http://www.youtube.com/watch?v=GPI6dFJCUA4
http://www.youtube.com/watch?v=bF3OyQ3HwfU&feature=related
http://www.fixya.com/support/r10724803-measure_voltage_in_transforme_fitness
http://www.fixya.com/support/r10786838-test_procedure_dc_motor

Test and see carefully the main motor, +loose cables+solder cool+bad contact+corroded terminal wires. Clean+Tight wires.Of course retight terminal fuses or breaker. And observes the videos +Tips Carefully.

ask for the manual here:
http://manualfox.com/link/reebok.htm

If everything still works but no belt movement, you motor controller is more than likely shot. If replacing you want to also pay attention to the deck and belt. Sence it sut down while running, it sound it an over heating problem which is usually caused from too much friction between the walking belt and the deck(the board under it) May require lube or may need replacing.

it is two items in this case. The light on the PWM will light if you force the belt to move. I would start with a lower board replacement. If it works fine then you need a new console. I have seen this when people use the heart touch bars on the treadmill and get a static shock. this can ruin the console.

I’m happy to help further over the phone at https://www.6ya.com/expert/howard_079189dd4959a511