Windows keeps asking for drivers
SOURCE: SCSI hard disk is not detecting in IBM xSeries 346 Server
Hi
While running the windows 2003 setup (winnt.exe), it will ask for SASI driver, you have to add the scsi driver... then windows 2003 os will detect the HDD.. then it will install..
SOURCE: how to install windows server2003in ibm server x3400
The install is fairly easy. Before you begin make sure if you have SCSI adaptors installed have the drivers for them on hand. If you do not have these drivers you should download them to a 1.4MB floppy disk. When you are ready, put the Windows Server disk in the cd/dvd and reboot the IBM. Follow the instructions on screen and you shoud be fine. From start to finish it should take you about 1 1/2 hours to complete everything.
Good Luck
Franklin
C2Solutions
SOURCE: About ibm server x3400 drivers
You can download the drivers from IBM's website:
http://www.ibm.com/support/us/en/
SOURCE: can I install windows 2008 R2 on ibm x226 server?
Hello,
You can if your system meets the minimum hardware requirement for Server '08. Check Microsoft website for more detail. You may need to up your memory if it is not above 2GB free and hard drive need at least 1GB for os to install.
Good Luck
C2S
SOURCE: ibm raid controller drivers for
I have a problem with x346 server i need raid drivers for windows server 2008 32 bit please if some one can help/
157 views
Usually answered in minutes!
×