SOURCE: Lexmark x3350 cartridge error
Error 1203 on a Lexmark is an issue that occurs either when a cartridge is bad
or the printer cartridge Slot is bad... I would suggest you to try
cleaning the copper contacts of the both carts and cart slot in the
printer and try again..
If that doesn't work just call up their support number and check for replacement..
SOURCE: error#1203
I had the same problem, and I took the advice to clean my printer heads...All i done was take out both, color and black ink cartridges, wiped them with a dry towel very softly, and reinserted them. It came up with 2 messages to confirm the colors item number, i pressed select like 6 times, then it printed an alignment page...I was good to go from there! Good luck to others!
SOURCE: Replaced colour cartridge and got error 1203
Power off the All-In-One (AIO) and remove the power supply fromthe back of the unit. Wait 30 seconds, then reinsert thepower supply and power the AIO on.
Did the error message return?
Yes:Continue to Step 2.
No: Print a test page. If the test page prints, the error is resolved.2 Open the top cover of the AIO and remove bothcartridges from the AIO. 3
Power off the AIO and remove the power supply from the back of theunit. Wait 30 seconds, then reinsert the power supply andpower the AIO on.
Did the error message return?
Yes:There is a hardware problem with the printer. Continue to ContactingLexmark below.
No: Continue to Step 4.4
Power off the AIO and remove the power supply from the back of theunit. Reinsert the power supply and power the AIO on. Open thetop cover of the AIO and insert the color cartridge. Close thetop cover.
Did the error message return?
Yes:Continue to Cleaning the Cartridge Contacts, thenrepeat Step 4. If you have already tried cleaning the contacts,continue to Checking the Cartridge.
No:Continue to Step 5.5
Power off the AIO and remove the power supply from the back of theunit. Reinsert the power supply and power the AIO on. Open thetop cover of the AIO and insert the black/photo cartridge. Close the top cover.
Did the error message return?
Yes:Continue to Cleaning the Cartridge Contacts, thenrepeat Step 5. If you have already tried cleaning the contacts,skip to Checking the Cartridge.
No:Print a test page. If the test page prints, the error isresolved.
SOURCE: I lost my Lexmark X3350 installation cd please help me
Lexmark's website at lexmark.com will have your drivers for download.
95 views
Usually answered in minutes!
×