How to get a meter reading for xerox 7220 PT2

If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

There's no way to reset the meter read, unless u replace the hole mainboard.

Go to "Reports" and then "Billing/counters". A print page with the counter.

Press "Menu". Scroll to "System Setup". Scroll to "Maintenance". Scroll to "Supplies LIfe". Scroll until you find the total count.

Hold down the C key for a few seconds. You will get sets of numbers flashing. Put them together for the meter. So an 09 followed by an 60 then a 70 would be a meter reading of 96, 070 copies.

You have to press the machine status button.
Scroll to" reports"then to "billing meter."
Then press enter and it will print out the total pages printed/copied.
There is no meter per se on the M20. You have to print out the reading on the report.

on the 416, click on the "machine status" button next to the lcd screen. scroll down to number 09, which is "Total Print Counter".

METER A is the square feet. METER B is linear feet