IC 601 controller is connected to my konica minolta bizhub C6000 printer but display is showing controller is not connected

Question edited for clarity and toss in some CAPS.
Question moved to category.

Error Codes > Konica-Minolta > bizhub 500 > Code C-2402

Printcopy.info https://printcopy.info > code=C-2402
Code: C-2402; Description: Erase lamp (EL) connector slip-off abnormality. - When EL turns ON before starting an initial charging, EL abnormality has been ...

Missing: press ‎C6000 ‎Pro.

Bizhub PRESS C6000 error codes

Copytechnet https://www.copytechnet.com > ... > Konica Minolta
Aug 7, 2013 - 1. Check the connection between the rear side connector of the fusing unit and the main body side connector, and repair it if any abnormality.

Check the Cyan Charge Corona housing. Remove it and reseat it. IF not that check the HV board. and or connection at the back of the drum and transfer middle assy.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

http://www.costarelli.it/supporto/Develop/Controller/IC-413/IC-413_Patch_Abilta+6000L/TechTicker%20KMBEU%20April%202012.pdf


try this site info

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Turning the Power On or Off - Konica Minolta Online Manuals

manuals.konicaminolta.eu/bizhub-C554-C454-C364.../id10-0061.html

bizhub C554 C454 C364 C284 C224 ... The Main Power Switch of the machine and thePower key on the Control Panel. No. Name, Description. 1. Main Power Switch. Press this switch when turning on or off the main power of this machine or ...

[PDF]C7000/C7000P/C6000/C70hc/ C6000L

myworks.sindoh.com/upload2/.../d37800822888835787371.pdf

KONICA MINOLTA Confidential. 2. C-2721, Intermediate .... v) Execute Printercontroller calibration for every output profile. (Standard ..... Start CWS5 and login to a Fiery controller. ii) Click [Calibrate] ...... If FD skew doesn't remain,. FD skew ......*A1DURX01: For bizhub PRESS C7000/C6000 and bizhub PRO C6501. 2.

Fusing error have tech look at and reset

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

try this

Self Help Product Support Konica Minolta Business Solutions Inc

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

If you are talking about the IC-601 it is mounted on the back of the copier

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Check the cable connections between the printer and controller.

Restart the printer. If that does not work then turn the printer off and restart the controller then turn the printer on.

Does the machine work ok as a copier? Not as a Printer but a copier? if so then check you printer properties and insure that the paper is correct portrait or landscape, thickness correct draw check a different computer.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

I believe that machine uses the same print controller as the Bizhub C350. You will have to verify this - it's an optional unit attached to the rear of the machine. It will be where your network wire plugs in. It "should" be a IC-401 model print controller. That's the driver you need from Konica.