Sony Rdh-gtk11ip demo mode off - Sony BRAVIA® DAV-HDX576WF Theater System with Wireless Speakers

SELECTED PRODUCT: (change your search)
How to disable the demonstration (DEMO) mode.
Article ID: 42707 ' Last Updated: 03/11/2014
Sony® stereo systems will enter the DEMO mode the first time you power on the system or if you do not operate the unit shortly after turning on the power to the system.
To disable the DEMO mode, while the stereo system is powered off, press the DISPLAY button repeatedly until the demonstration display disappears.
NOTES:

• Depending on your model, some units have a DEMO button that is used to disable the demonstration mode. If your unit has this button, with the power to the system off, press the DEMO button until the display disappears.
• If applicable to your unit, setting the clock on your stereo system will also disable the DEMO mode.
• Using the buttons on a supplied remote control will not disable the demonstration mode.

If model-specific information is needed to complete any of these steps, refer to the operating instructions supplied with the product. Manuals, Specifications and Warranty information for your Sony product is available online.

Press DISPLAY. If you need a manual you may download a copy at http://www.docs.sony.com/release/RDHGTK33IP_EN.pdf

Put the unit in dvd mode. then press and hold the stop and eject buttons. The display should read "demo off". Then the tray should operate normally.

If you have the remote, press the menu button and look for the demo mode settings or try turning your cd player with your ignition switch on but not crunk, press and hold the volume dial and wait for the demo mode settings to show up and turn the dial until the demo mode is disabled.....

I hope this helps you out bro, it's the only information that I could find on that unit.

If only demo mode is playing,it's mean set is in standby mode.Normally
in standby mode it can't be operated.You have to power on the set by pressing power botton during demo mode.Once it gets power on,it will
start to work according to user required function.If the set not get power on after pressing power botton,then it's an electrical problem
and need to visit your nearby repairing centre.

Here'show to turn off the demo mode,

Power ON the television
(Use remote Commander)
1.Select "TV" mode (not AV, demo mode can't switch offwhen you are in AV)
2. Press the "home" button on the remote.
3. Select "settings"
4. Select "set up"
5. Scroll down to "factory setting" and restore them.
6. When it asks home or shop display select "home".