Pyramid 4000 time clock won't pull time card through

Recommend contacting Pyramid customer support directly here:

http://www.pyramidcaraudio.com/ContactUs.aspx

You might try starting at this page from Seiko
(I could not further because you do not give exact model number)
Instruction booklets

10.June.2015

Recommend contacting a local car audio professional or Pyramid customer support directly here:

http://www.pyramidcaraudio.com/ContactUs.aspx

It might need the fan plugged in to make a full curcit and that's why it won't turn on

needs to be serviced. a sensor may be not working. Try www.gatewaytime.com

Error 1 - Indicates time card stuffing. If an individual tries to force a card into the unit, the 4000/4000HD will accept the card but will not print or store any payroll data. If this situation occurs, an ERROR 1 will show on the front display and the card will not be "punched".

Solution: Rerun the time card through the time recorder without pushing on the card.
Resource 1 : Owner's Manual

I have no solution, however I have the same problem. Wondering if you have resolved the problem yet?

pull out 1 rca jack at a time and try it..usually speaker wires touching...or blown speaker

Hi there, the installers forgot to wire your auxiliary wire to the proper connection. this is the reason why the clock doesn't stay on after the ignition switch is turned off. i assume they just wired the aux wire with the power wire, which is wrong. this is causing the random power button scramble. Although, the aux wire is crossed into the power wire, this random power button scramble could be a manufacturing mistake as well. hope that helps and, thx for using fix ya.