Reprograming my voice message for incoming calls

KX-TGA101S is an add-on handset for a Panasonic KX-TG1000 series cordless phone system. One of the models that is compatible with the handset is the KX-TG1032S. You can find the manual for the phone system on the product page here: https://shop.panasonic.com/support-only/KX-TG1032S.html . Assuming that you do not have voice mail from your telephone provider, you can change the number of rings from the Answering Device Settings Menu.

Start with the phone system in standby (no incoming or outgoing calls) mode. Press Menu and use the up/down keys to navigate to Answering Device. Press OK to enter the sub-menu. Navigate to Settings and press OK. Navigate to Ring Count and press OK. Use the up/down arrows to choose a new number of rings. Press OK to save and press Off to exit the menu system. Note: if the ring count is set to Toll Saver mode, the answering system will pick up on the second ring if there are new messages. It will pick up the incoming call on the fourth ring if there are no new messages.

See page 31 of the manual for the KX-TG1032 for this information. See page 23 for the way to navigate through the menu and a list of the menu tree items. The current link to the manual is ftp://ftp.panasonic.com/telephone/om/kx-tg1031_en_om.pdf .

I hope this helps.

Cindy Wells

The KX_TGA204C handset is compatible with a few different Panasonic cordless phone bases, including the KX-TG4011C. Unfortunately, you can't block incoming calls at the phone. This phone system does not have a Call Block list option. You might be able to get your telephone service to block incoming phone numbers for a fee.

The directions for using the handset are in the manual for the phone system. Panasonic has the manual here: ftp://ftp.panasonic.com/telephone/om/kx-tg4011_mul_om.pdf . ManualsLib also has the manual here: https://www.manualslib.com/manual/854052/Panasonic-Kx-Tg4011c.html?page=3#manual .

I wish that I had better news for you. To see some Panasonic cordless phone models that include the Call Block feature, see http://shop.panasonic.com/cordless-corded-telephones/cordless-telephones#prefn1=features&srule=newest&prefv1=Call%20Block&nextIndex=0 .

Cindy Wells

I'm not familiar with a KX-T6160 system, so do you mean SIX-SIXTEEN-DEE(616d) or SIX-SIXTEEN-TEN (61610)? Either way, the cordless phone works. You need access codes, like 9 for an outside line, FLASH and dial an extension for transfer, 40 for ringing call pickup (on the 61610), and 58x (61610) to pick a line from hold. Your phone system manual has a single line telephone user guide in it.

Carl

check manual to reprogrammed it

There is an internal battery on the base unit, I am not sure if there is a door for it on this model. For the hand helds just remove the battery for a while.

Called Panasonic Support. The unit will NOT record voice messages whilst in talking mode.

Here you go

http://service.us.panasonic.com/OPERMANPDF/KXTG2257TXT.PDF

Click on the link below then click on English Instructions. it will download the manual then you can just click on the Print icon

http://www2.panasonic.com/consumer-electronics/support/Phones-Fax/Telephones/2-4-GHz-Phones/model.KX-TG2257S

You may follow the directions for this in the manual. You may follow the link bleow. If you need assistance with the manual please message back and I will be glad to assist you.

http://www.retrevo.com/s/Panasonic-KX-T7633-Telephones-review-manual/id/2915ag911/t/1-2/

I have seen this issue before and panasonic knows about it. I would contact them directly.