Jabra BT 160 Blue light flicker then nothing

Defective battery or defective charger.

I opened mine into the on position and the charge light went from blinking to solid red.

you need two hold in the button until you have a continious blue light then pair up

Try to press and hold the center on/off button for 10 seconds, this will put the Jabra BT2050 into paring mode.

Assumptions made:
1) The BlackBerry is Bluetooth enabled.
2) The Jabra BT2050 is fully charged.

Hope this help.

Joseph

I have the env Touch and the Jabra Halo. Initially, I had a problem pairing the two, then I realized that I was not following the directions properly. The manual shows two sections for pairing ("first time pairing" and "later pairing"). I was following the instructions for the former when I should have been following the latter. I also failed to notice that the BT indicator was flashing blue and not solid blue, as it needs to be, for pairing mode. So, if you haven't already done so, follow the instructions for "later pairing" here. Make sure that you see the SOLID blue light on the BT indicator on the headset when you try to pair.

Hi,


1. I have the Jabra 125. You can get the manual at www.jabra.com if you have a different one. 
2. Turn off your phone. Power off. The order of powering on devices is the key. 
3. Press and hold your Jabra power button until it's glowing blue (not flashing blue light--but constantly on) 
4. Then turn on your phone...and look for wireless devices in your phone menu. 
5. Make sure you have bluetooth turned on.
6. the phone will find the Jabra, and then will ask to pair with it. passcode is 0000. 
7. That's it. 

Again, the key is the order of turning on devices.

Thanks.

You simply need to hold the button down for a long time, it will flicker blue at first, don't let go of the button, and it'll turn blue for pairing.

BT350 passcode is 4 zeros... > 0000

http://www.jabra.com/Sites/Jabra/ap-en/headsetsupport/pages/Knowledgebase.aspx?kbid=9042862d-c51f-4611-98f6-dfe338dbf3ca

I would also like to know if you find a fix for this problem. I have the BT500 and it will also not turn on.

You need to let it charge for 24 hrs!