My alcatel stuck at calibration

Select the Accessibility button ?
Option (1) Touch Panel Adjustment - Touch the four "+" buttons ? Press Start ? Close

They usually work if you are away from magnetic aberrations. Take it out to an isolated area in a field, away from power lines or metal structures. Also don't take any electrical or metal devices with you either.
Calibrate the compass by moving the phone in a figure 8 pattern, or follow other calibration instructions. If that doesn't work, perhaps your phone has no internal magnetic compass sensor.

https://www.google.co.uk/webhp?sourceid=chrome-instant&rlz=1C1CHBD_en-GBGB719GB719&ion=1&espv=2&ie=UTF-8#q=Calibrate+Alcatel+onetouch+model+A462C .try looking at some of the links here.

hi there, i just want to know if the problem is solved by now, cause i need the solution too cause i have the same problem with my alcatel ot 880

Just got the phone myself & couldn't figure it out either, It turns out that thing that I thought was an areal is a pen for it, or the 'stylus', just use that for the calibration a few times & it will work.

This for an Alcatel 708 btw.

I dont know if this will work for you, I had the same problem on the 708 model, in the end I figured out that what I thought was the aerial can be pulled out & used as a pen ,or the 'stylus'.

Hi Eli,
I suggest you to run the clear calibration utility from the devellopers:
http://www.wingmanteam.com/latest_software/gadgets.htm#Clear Calibration Utility:
Thanks and have a nice day !
J -

calibration wizard. you have to calibrate the touch-screen mobile model No: JC 777s

Greetings,
Sorry to hear that you are stuck?
If and when you regain the function of the menu button, you should perform a calibration. It should be done every time you install or replace a printhead. However, you can run a calibration if you are seeing changes in the image quality. Calibration aligns the printheads and performs a nozzle health check to enable high-quality prints.
1 Load the main tray or photo tray with photo paper.  You don't have any photo paper, but it is recommended for calibrations. 2 Press Menu. 3 Scroll down until Calibrate Printer is selected. 4 Press OK. A new screen appears with Print Calibration Page selected. 5 Press Start and follow the instructions on the LCD screen to complete the calibration.
If the stuck condition presists, let us know. Best bet is to call us directly at the 800 421 6699 as our team will be able to get you running quickly.
Talk tol you soon,
Ron Baird the friendly Kodak guy

have a china made handheld double sim touch-screen phone. The device is Winkoy T6688. The touch screen got damaged and after reseting the device, the following notice appears after turning it on:

"Calibration wizard. You have to calibrate the touch-screen. Click anywhwere on the screen with your stylus to start calibration".

Of course you can´t but there´s no other option because it won´t accept any other input until it´s calibrated apparently. Does anyone know how to bypass this calibration wizard on start up?