Droped my cam corder - Handycam Sony Video Cameras

change with other if other woking ok then problem card other wise related cam corder

Go here and download your needed drivers & software: http://www.aiptek.com/drivers.htm

i think in xp your camcoder will be automatically detected. if not download the driver , install and then reconnect, it will work and u will be able to transfer data vice versa.

Two things here. Is your cam corder a digital one? If so there should be a connector on it for either firewire or USB, and if not, you will need some kind of video capture device if your cam corder has outputs on it. If not, you will need a player (vhs-c or 8mm or whatever your format) that can send out to the computer. Once this connectivity is done, you need video capture software that will "encode" the video files that will be produced. If your cam corder is already data (hard drive onboard or SCD card recording, you will only have to "demux" the format you have into the format that you are seeking (ie.. MPG to AVI or so on).
I hope that helps you out.. let me know if you need more clarification. It also might help if you give the media you have (VHS-c etc.) and the available outputs that you see on your cam corder. Thanks!

mrstan

Fixya does not run any training courses. What software are you using to create the movies to play on your TV ?

Yes, it takes a while but will work eventually

Please mention what operating Windows your are using in laptop. Windows xp or vista.

Hi FixYa.
My cam corder is model number DCR-PC9 not DCR-TRV525
dileep007 tried to help me was not successful
I have always used DVM60 casset
Will appreciate help to solve the problem.
Sincerely
Mark Kaufman

You are likely using the S-Video cable (multi-pin cable that connects to the front of the camera below the spotlight). This cable carries video but not audio. To get audio, use the multi RCA to 1/8" adapter (has red, yellow, and white cables and plugs into the side of the camera)