Insert USIM what does it mean

No sim card in phone After youu insert the card please reboot

it means your mobile is not yet unlock or openline

bring it to a mobile service center








please rate me..thanks

kindly check if sim is properly inserted...

i hope this helps...

if not bring your phone to any cellphone shop and let them install your simcard in your phone.

P.S. – I would greatly appreciate a FixYa! rating if the solution I provided fixed or helped you resolve your problem

first u try ur sim in other phone n if it dont work than go to the service operator n ask for a new sim with same number. pl let me knw abt it ok .

Did you insert any usim into it? If you did, maybe it did not sit well, all you need do is to shock the usim with paper or anything that will make it hiold firm to the phone.

And if youn did not insert any sim I think you need to do so, to keep your phone going.

I wish you the best.

Hi,
It means you need to insert a sim card into your phone if you have not.
I hope this helps!!!

i had a lg u890 mobile phone that i got unlocked but it had the same proble where i swithched on my phone it used to ask for the usim code..my old phone was locked to the 3 nt/wrk i got it unlocked so i could use my 3 nt/wrk sim card or any network simcard but i used vodafone 3g sim card.the code i used with my vodafone 3g network simcard in phone when switched phone on & it asked for usim sim code i inserted code i got & it shut the phone down then on again then it wld work with vodafone no bother at all it even came up with vodafone uk etc.but i had to reconfigure the sms/text telephone number aswell as reconfigure the mms settings & numbers etc aswell as reconfigure wap settings from 3g network to vodaphones.but after i got it all unlocked & settings changed etc & inserted a different 3g network simcard ie vodaphone/orange/o2/3g sim/t-mobile/tesco sim/virgin sims & switched phone on it asked for usim code i tryed the code i have & inserted the same code i have it/they switched phone off & then back on & all network usim card worked with no problems at all.the code i have is.>>> 142358#*# thats 142358# * # all 1 item/action.once you insert that 142358#*# thats it your phone will shut down then restart up & go onto the network usim card you want to use or inserted before using code.but 1 thing tho please remember if u switch off your phone or your phone switches off as batterys run out no power u will need to insert the code again.& another thing code wont work if your phone switches off or you switch it off & plug your mobile battery charger into phone to charge your battery up on the phone & you switch you phone back on when you are charging your phone as the phone will switch on & say insert usim code if you enter the code the phone will switch off & back on again but it will still request usim code.so you will have to wait unto there is plenty of charge in the battery to take phone off charge & swithch your phone on get the usim code message insert code above phone will switch off & straight back on again & then it will go onto your prefured usim card then you can plug your charger into phone again to charge phone up.you can use your phone on charger when u have entered usim code & it switched off & on again & registered with the prefered network.i hope this is of use to you as it is to me.if you try this code & either if it works or not please can you let me knows ty.email [email protected]

well, if oyu have falshed the phone, the final thing you must do is after booting it up again, simply press: 142358#*#, whilst an unsupported SIM is inserted, which will thus reboot the device!

Insert any other sim in ur mobile if that is working fine then u need to swap the sim

 

Gizmo1