Reset pro username password - D-Link AirPlus Xtreme G DWL-2000AP 802.11g/b Wireless Access Point

It have button for reset. click in 10 seconds.
iF YOU DONT WANT TO DO THAT, because it will reset to factory setting

So how to reset without lost username password?

type at your browser 192.168.0.1
FILL USERNAME AND PASSWORD. that is for modem router username and password.
if you never change,then try
USERNAME:admin
PASSWORD:admin

IT WILL OPEN IT USERNAME AND PASSWORD IS TRUE.
THEN GO TO MANAINTENANCE->REBOOT.

how to change password in grand chase

try these...
username: password: (blank means no password)
administrator administrator
operator operator
administrator

(less likely ones)
anonymous
user user
user public
PFCUser 240653C9467E45

If these all fail, reset your router and try again.

If you have not changed it, the default username and password can be:

Username: can be left blank or use "admin"
(without the quotes)

Password: can be left blank or you can use either "password", "1234", "admin"
(without the quotes)

Mac OS Password
This is your solution.

It's either:

Username: admin
Password: admin

or

Username: admin
PasswordL password

there is a small reset button that u will need to push with a pen. Its usually to the back or side of the router.

Just jeep pushing it until the router resets then use the default username and password.

defaults. (normally)
user name - admin
password - admin

username - Admin
password - admin

username Admin
password Admin

user name Admin
password (blank)

username admin
password blank

look in your manual for the default username and password and instructions on how to reset.

Hi the username and password for the router has been changed while the previous configuration.If you can call your service providor they should be able to provide the same.There are other some common usernames and passwords which you can try.
username:admin
password:epicrouter
*OR*
username:admin
password:password
*OR*
username:password
password:password
*OR*
username:snowflake
password:password
*******Alternatively you can also try to reset the router to its default settings by pressing the reset button at the back of the router(however this should be the last step of action).

I dont know which password you asking about but:

if the password is in setup utility of system then you have to reset the bios & if it is of windowsXP then press ALT+CTRL+DEL 2times then it will ask for username and password,
TYPE
username: administrator
password:

no password and press enter if the system still say wrong username & password then it means you have to format & reinstall it if you also forgot administrator password.