At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I would say on every 2 loads, we get a flashing CHECK WATER TAP on our readout. What is it and what can I check? We have had the Nexxt Premium set for about 4 or 5 years and never had a problem with it yet. This is new.
Also having problems when the liquid softener dispenser will mix softener with water, but not drain. Any advice?
every time my washer gets to the spin cycle it say check water tap I have had 3 people check it and nothing is wrong with is- Someone please help!every time my washer gets to the spin cycle it say check water tap I have had 3 people check it and nothing is wrong with is- Someone please help!
AnonymousJan 26, 2008
Im having the same problem - softener doesnt dispense but gets diluted with water on occasionIm having the same problem - softener doesnt dispense but gets diluted with water on occasion
You can't post conmments that contain an email address.
Remove the cold water hose from the washer look inside the parts of the washer you unscrewed it from, there is a plastic screen in there that needs to be clean out. you can pop it out with a small flat head screwdriver, clean it then pop it back in. also remove cold hose from valve on wall. there is another screen in there that needs to be cleaned. this will fix the problem
It is a software bug and happens when there are heavy cloths inside that suck up too much water. Then the water level does not rise fast enough, and the washer thinks that the water tap is closed. I am not aware of a firmware fix. We simply switch the washer on an off, and restart the cycle. Very annoying.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
check that the tap is fully opened , the filter in the end of the hose is not blocked
check that the tap washer is not jammed off in the tap as they can expand and not move up to let water in
check water inlet solenoid is functional
Did you open the water tap complete? When it is open all the way already, please close the tap complete and remove the hose and check the filter closest to the tap. Eventually clean it and put the hose back. Don't forget to open the tap again and check you did tighten the hose. (No leakage)
Hi just read your posting.The 2 lights that are flashing means your machine has not detected any water level difference.1st turn off both hot and cold taps and 1st remove the cold inlet hose from the machine end,Put the end of the hose into a bucket and turn the tap on.You should get a good flow of water.If you do not get a good flow of water then remove the tap end of the hose and see if you are getting water out of the tap.Check the inlet filters on both ends of the hose to see if they are blocked.If they are blocked clean them with a brush.Check also the water valve end where the hose connected to the machine to see if this filter is blocked. Once you have water coming out of the hose and all the filters are clean refit the hose and repeat to the hot hose.Now select a cycle and push start.If the water flow is good then the machine will work properly.If you still get slow water even when you have good pressure coming out of the hoses then your water valves are faulty.Please reply on how you got on and for further advice.looking forward to your reply.
This is indicating a problem with the water supply, check the inlet hose/s for a restriction or kink in the hose/s.
Make sure the tap/s are fully turned on, and that there is a good water prerssure.
I have this problem. This code is due to restriction of water flow. In my case, we have sand in our water, and I have installed a filter between the water line and the washer. When it gets clogged, the flow is restricted and the Check Water Tap message appears. Your washer has filters on the back of the washer itself that may be clogged and need cleaning (which is why I installed the water filter between the washer & water line to prevent it from getting into the washer filter). Your washer manual shows you how to check/clean them. Also, you may have low water pressure during summer months due to lawn watering in your area that could cause this lower water pressure.
H20 is indicating that you have no water coming in.
Check water is turned on,check hose(s) are not kinked, and finally check inlet valve.
If you are not sure if there is water to m/c, turn the tap off, disconnect the hose(s), and hold over sink and turn tap back on, water should come out, if it does not, then there is a prob with the supply.
Plz rate my solution.
Thanks.
every time my washer gets to the spin cycle it say check water tap I have had 3 people check it and nothing is wrong with is- Someone please help!
Im having the same problem - softener doesnt dispense but gets diluted with water on occasion
×