Remove stand planar 1500m - Planar PL1500M 15 in. Flat Panel LCD Monitor

Remove the battery and insert again. Reprogramme the Radio and check it will work. Also disable the key by which you use for lock the channel.

Here is the user's guide for your monitor:
(from Planar's website)

http://www.planar.com/media/222919/mn-planar-px2710mw.pdf

Hello,

You require a user manual for your Yaesu 1500m.

Try this: join yahoo group SPECIFIC to your radio Make/Model, you will receive great information and you can download manuals, diagrams and other goodies for your radio, if available and all this is free.

I hope i have assisted you with your query.

Regards,
Peter

Only the Planar Dome DX2 card..... no other. Planar did this on purpose to sell those cards at 2k each. Now very reasonably priced on eBay, but they'll only work on XP, not W7.

Here is he user manual:
http://www.planar.com/products/docs/cbu/current_manual/mn-planar-pl1910m.pdf

http://s807.photobucket.com/home/budm/allalbums
http://en.wikipedia.org/wiki/Capacitor_plague

Hi,

Here you can see the schematics http://www.repeater-builder.com/yaesu-vertex-standard/ft-1500/ft-1500m-sch.pdf

The manual can be found on the Yaesu website, http://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=106&encProdID=92FB2363C1E0B9EBC9D3479054E0120B&DivisionID=65&isArchived=1

Good luck,
Gerard

Goto: http://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=106&encProdID=92FB2363C1E0B9EBC9D3479054E0120B&DivisionID=65&isArchived=1

On the power board, you will see two large electrolytic capacitors at one corner and a transformer directly next to them on the long side of the board. The big blue (usually blue, anyway) box next to those is C97. On the other side of that are three white power resistors standing in a row. The part number label for the board is usually on the edge of the board right close to C97.

Try running Belarc advisor to check the motherboard manufacturer.
Lots of companies use Intel chipsets

The most common causes for this (in order) are a defective door switch, door switch mount, or a bad connection or relay on the control panel. If you or a friend decide to work on it, we have *critical* safety, disassembly, and troubleshooting info (as well as a text file which helps in diagnosing and repairing door switch problems) at our site, which is linked at our listing here on FixYa: http://tinyurl.com/yzjozk