Won't load discs - Sony DVP-NC85H Multi-disc DVD Player

https://community.sony.com/t5/Blu-Ray-General/Blu-ray-disc-won-t-play-on-Blu-ray-player/td-p/99903

1. No disc. - Load a disc into the tray.
2. Disc has been loaded upside down. Place the disc with the label side up.
3. Disc region code does not match region code of the player.
4. Disc type is not the correct type to play.
5. Disc is damaged or dirty. Clean the disc or try another.
6. Moisture may be condensed inside the unit. Remove the disc and the leave the power on for one or two hours.

follow the steps and fix it.
God bless you

Check its loading mechanism for proper disc loading. Replace the loading belt first and check. If it does not help you, insert a cleaning disc into it. If the fault is with accumulated dust or dirt on the laser pick up lens, it will be cleared out. If not, replace the laser pickup unit.

Loading may mean it is not seeing the disc---A dirty or bad optical pickup is possible if you get this error with every disc.

Either a mechanism problem or a problem with the Optical unit inside (optical pickup) being dirty or bad.

Check the data connector on the rear of the drive. If this doesn't work you may need a new drive, they are cheap and readily available.

The laser is wearing out. If it is under warranty you can send it back to Sony for free repair. If not, they will charge you $150 to fix it.

• you can try to uninstall unwanted programs from control panel.
• Save your maximum data in D drive into in C Drive.
• Don't save heavy files on your desktop..... move it to D drive etc.....

What a load of rubbish this camcorder is and Samsung customer service is a load of rubbish too.