Setting clock for cascade CEO91DM - Dacor 2 cu ft 1200-Watt Countertop Microwave Black DMT2420BK

Colin,
Most of the time, you hit clock, then on the keypad, punch in the time of day and then either hit clock again or hit the start button. Some models may ask you for AM or PM but it will scroll a message if it is going to ask that & will tell you what button to push. Hope this helps!

On some Galanz models setting the clock is a bit unusual.
You have to press the clock/preset button once then press pause/clear. Now it is in Clock mode setting and you can set the hour then press clock/preset again to set the minutes then press once more clock/prest to finish the operation.

HELLO.

solution on setting your microwave clock is explained below.

This is a standard 12-hour clock (12:00-11:59) and does not show a.m.or p.m.

The microwave oven and timer must be off.

1. Touch Clock.
2. Touch the number pads to set the time of day.
3. Touch Clock or Start.

Thanks.

HELLO.

Setting your microwave clock is explained below.

It is a standard 12-hour clock (12:00-11:59) and does not show a.m.or p.m.

The microwave oven and timer must be put off.

1. Touch Clock.
2. Touch the number pads to set the time of day.
3. Touch Clock or Start.

Thanks.

To set the clock to 4:30, for example:

CLOCK > 4 > 3 > 0 > CLOCK

- or -

CLOCK > 2 > 4 > 3 > 0 > CLOCK
(the two means you're setting the clock, as opposed to 1, which would be to set the timer)

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

According to the manual this is how to set clock.

To set the clock, press "Clock" once or "Timer/Clock" twice (depending on your keypad).
The colon symbol (:) will flash.
Enter time of day. The time appears in the window; the colon continues to flash.
Press "Clock" or "Timer/Clock" again - colon stops flashing; time of day is set.

If you need the manual it is on link below.

http://service.us.panasonic.com/OPERMANPDF/NNH624-SET%20UP.PDF

Good Luck

I think on this one you press the CLOCK/TIMER pad, then enter the desired time using the 10 MINUTES, 1 MINUTE, AND 15 SECONDS pads then press CLOCK/TIMER again.

If that doesn;t work, press STOP / CLEAR then try the above again.

Let us know if it does not work.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

One of these combinations may work:

CLOCK > 1 > 2 > 3 > CLOCK

CLOCK > 1 > 2 > 3 > START

CLOCK > CLEAR > 1 > 2 > 3 > CLOCK

CLOCK > CLEAR > 1 > 2 > 3 > START

Otherwise, I would contact the dealer you bought it form to see if they have a number for Cascade.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

In most brands, you set the clock by one of these combinations of key presses:

Clock > time digits > Clock

Clock > Clear > time digits > Clock

Clock > time digits > Start

If that doesn't work, please reply back with your brand and full model number.