Mebor HTZ 1200 - HTC Audio Players & Recorders

you want to play music or a film on the laptop and run it through the Pioneer HTZ-170DVD Region Free Home Theater System and through speakers?

I don't see why not. You would use the audio out on the laptop and connect to the audio input on the Pioneer. If the laptop has HDMI, it is even easier. Here is the manual.

Pioneer HTZ170DVD Manuals

ManualsLib https://www.manualslib.com > products > Pioneer-Htz...
We have 2 Pioneer HTZ170DVD manuals available for free PDF download: Operating Instructions Manual. Pioneer HTZ170DVD Operating Instructions Manual (102 pages).

..

Question edited for clarity and typo 'PioneeEr' (3 x Es).
Question moved from Cameras to the Pioneer Model category. Why SHOUT it is in the wrong category when you could have put it in the correct one yourself? You have 10,000 to choose from :>D
Please don't type in all CAPS, it is considered SHOUTING, is RUDE and also harder to read.

The internal cooling fan has failed and needs replacing. Take it to your nearest Pioneer Service Centre. It is a cheap repair, or open it up and replace it or even vacuum up all the fluff and lubricate the fan.

https://www.google.com/search?q=PIONEER+DVD+SURROUND+SYSTEM+HTZ-55DV....POWER+COMES+ON%2C+DISPLAY+SAYS+CT+FAN+ERR

..

You may have to turn to Pioneer authorized service. They may have a special remote that can accomplish this, but it can cost a bundle. Samsung players are easily turned region-free with the normal remote.

What do you mean by this question "How do I reach you"?

I looked thru the HTZ151 manual and there is no mention of an optical connection. If it did support optical, you would see a square black port usually on the rear panel.

Make sure both deviced are set for 60 htz, it might be that there is a signal overly if one is set for 50 htz and one for 60 htz double check your screens refresh rate make sure its 60 htz as well. If it flashes once every second while staying on most of the second this could be it. check to also make sure all the cords are correctly positioned and try to keep the cords away from audio equipment stereos/ home audio, this can also cause signal issues.

That is telling you that the broadcast signal is at 60 htz.

hello, I can not configure memory 333dvd htz home theater

That looks like a broken laser,but try to change flat cable and see how much is resistance on the spin motor(it must be between 8 and 12 ohms)

out put protection fault check speaker cables and speakers