Starline gce 5933

email

• [email protected]

This is usually a good situation to bring to alarm shop and have them take it out and see if you can just keep the remote start or it might need a new brain on the alarm system

Thank you was driving me. Crazy.

• Hi, I can help.
• As long as the alarm indicator is illuminated on the LCD screen the alarms will sound.
• To get rid of the alarm indicator press the "enter" button on the top of your alarm clock. No more alarms at all.

• If you have any comments please feel free to leave them here.
• Hope this helps and thank you for leaving FixYa.

Regards, Tony

Hi,

F7 means Function Key Shorted or Stuck Button.

Have you tried to Disconnect it for few few, say 30 minutes and then Turn it Back ON. If not try it and also Try to Press Cancel / Clear Buttons, if that help the situation.

Unless, you need to replace touch pad or clock assembly (also called the ERC) or attempt to un-stick button.

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Under the heading ALARM are 3 buttons. One says RADIO, one says CD, and one says NATURE. If any of these buttons are selected, the alarm will go off. So make sure none are selected, and the alarm won't sound.

If you want to turn off all system beeps (like the ones that go through your computers' internal speaker ):

1. Go to Start-->Run-->Type Regedit.
2. Go to HKEY_CURRENT_USER\Control Panel\Sound
3. Edit the key Beep and give it a value of No

This will help you to turn off system beeps.

Here is a link to the manual http://www.docs.sony.com/release/ICFC318.pdf

Please rate this a fixya

what you can do is go to ringtone settings and assign a specific tone to it....and then test it