I lost the combination to my APC PNOTECL5

Pray for a miracle. Because these locks are made to be indestructible. They can't be opened by thieves and normal humans either.

You can get it here, you will need to prove that it belongs to you. Customer Service

Probably not. But a simple solution for this is to turn the numbers and listen for a click when the tumbler locks into place. You' should be able to get the combination from both locks by doing this.

Rather than asking your question to users of a specific non-bike related website, why not just Google "kryptonite default combination" kryptonite default combination Google Search

I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

the preset factory combination is 0014

Krypto has the resetting of the combination lock on their website (under Maintenance) but if you cannot unlock it in the first place you can not reset the combination. You have to know the old combination to get it open.

Thanks Chris Wheeler, I tried unlocking my kryptonite kryptolok and with your suggestions i did unlock it in a minute...its 0005

try all zeros Kryptonite locks come preset to zeros once unlocked there is a small lever inside were it locks together pull it down and set your new combo then push it back up

Try this....
My new lock didn't come with any instuctions. I followed the link above and located the "bike locks" heading. I found that the question:

- I have a Kryptonite resettable combination lock and can't find the instructions for resetting it. How can I change the combination?

contained a pdf titled :

- Resettable Combination Cable
(red reset buttons inside)

which is not the cryptoflex 1218 but is compatible anyway.

dont hurt your fingers trying to depress the nodules as the diagram says though. to my chagrin i discovered that they will turn easily if you just push them around into place.

here are the instructions:

To set your own combination
Your new lock is preset to open at 0-0-0-5 at the factory.
1. Open the lock by aligning the opening combination
number to the Guide Points and pull out the Lock
Post. (Figure 1)
2. Push down the two Reset Buttons simultaneously
with thumb and forefinger, and turn counterclockwise
until it comes to a stop. (Figure 2)
3.You are now ready to turn the dials to set your
secret combination, such as a phone number, birthday,
etc.
4. After setting your secret combination, turn the
two Reset Buttons again by Thumb and Forefinger
clockwise until it comes to a stop and back to its
original position.
5. Verify your new combination before using your
lock. Insert the Lock Post all the way into the Locking
Port but do not turn the dials. Pull out the Lock Post.
Your lock is ready to use.
6.The reset operation is now complete. Repeat
steps 1-5 anytime you wish to change your secret
combination.