8650 p21 p6 - Konica Minolta Office Equipment & Supplies

ever think of asking the manufacturer's tech support .we do not even know the make of what you have

Get support for your Konica here:

https://www.biz.konicaminolta.com/download/users-guide/

Good luck.

Registration errors. Have tech come out clean IDC sensors and replace black i/u

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

A Malber P21 has the following dimensions:
Height:33 1/2"
Width:23 1/2"
Depth:20 7/8"
(From the AJ Madison Web Site)

The model is discontinued, though.
http://www.ajmadison.com/cgi-bin/ajmadison/P21.html
The current model is the P31.

It's an Italian model sold primarily in the New York area.

You may want to call Malber at 516.323.5299. or email [email protected].

P6 : cyan image unit problem. P21 come after P6, and it's also too a cyan unit image problem. replace the cyan image unit.

replace the black image unit and clean sensors under the transfer belt

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

look the drum unit need to be replaced

desloder old P6
tin 4 pads at rear of P6 location on Mobo
add solder to one tab ( holding tab)
place p6 in position
tack in place amking sure conductors of P6 are inline with the solder tabs
tack up other holding tab
with a CLEAN iron touch each connector of the P6 into the tinned conductor on the board - do NOT try and add solder or you'll just bridge the 0.5mm gaps!
DONE
or get it done at www.dsdoctor.co.uk

I have a Malber P21 the door was open and not turned on and it filled with water till it overflowed onto floor....any ideas?

There is a simple solution to import mpp files into P6.

Please contact me.
[email protected]