Set date time

To reset the time and date on your Olympus WS-852 digital voice recorder, you can follow these steps:

1. Turn on the device by pressing the power button.
2. Press the "Menu" button to access the main menu.
3. Use the arrow keys to navigate to the "Settings" option and press the "OK" button.
4. Use the arrow keys to navigate to the "Time and Date" option and press the "OK" button.
5. Use the arrow keys to navigate to the "Time and Date" option and press the "OK" button again.
6. Use the arrow keys to set the correct time and date, and press the "OK" button to save the changes.
7. Press the "Menu" button to exit the settings menu.

It's important to check the manual of your device to ensure the above steps are accurate, as the process to reset the time and date may vary depending on the firmware version or the model of the device.
If you still have trouble resetting the time and date, it may be best to contact Olympus customer support for further assistance. They will be able to diagnose and fix the issue or tell you if a repair is needed.

How do I set the date and time on the FE-170?


To access the clock controls, turn the mode dial to any shooting mode except [GUIDE] and then press the [MENU] button. Next, press the Right arrow on the arrow pad to select the [Setup] icon. Using the Up or Down arrow, navigate to the menu item depicting a clock. Press the [OK] button to access the clock settings feature.
Set the year, month, day, hour, minutes and date format using the following procedure: Use the Up and Down arrows to select values, and press the Right arrow to advance to the next item. (The FE-170 uses a 24-hour clock.) When all information has been entered, press the [OK] button to set the values. Press [MENU] twice to exit the menu.
To set the time precisely, with the cursor on either "minutes" or "date format," press the [OK] button as the time signal strikes 0 seconds.
The date and time settings will be returned to the factory defaults if the camera is left without batteries for approximately three days. Custom settings may be canceled more quickly if the batteries were only loaded into the camera for a short time before being removed. Before taking important shots, check that the date and time are correct.

• Double click the time display on the bottom right of the computer screen to open the date and time properties box. Use the tabs to access settings for time, date, time zone and Web-based time updates.
  
• 2 Set the clock for the correct time zone. Click the "Time zone" tab. Click the drop-down menu for time zone choices. Click the time zone choice for your area. Click a check in the box for automatic updates on daylight saving time changes. Click the "Apply" button, then the "OK" button.
  
• 3 Set the correct date. Click the "Date and time" tab to show clock and calendar settings. Click the drop-down menu displaying the name of a month to change the month. Use the up-and-down arrow keys to change the year being displayed. Click on a date on the calendar image to set the date. The time can be manually set on this page also.
  
• 4 Set the current time. Use the up-and-down arrow keys next to the numeric time display on the date and time page to manually set the clock. Click "Apply," then click "OK" to confirm date and time settings.
  
• 5 Click the "Internet time" tab to use a Web-based clock for updates to automatically correct the time. Click the "Server" drop-down menu for listed Internet time sources. Click a check mark into the check box for automatic synchronizing. Click the "Update now" button, then click the "OK" button.
  

Use the MENU/OK button to the right of LCD screen in lower corner.
1. Press MENU/OK.
2. Press RIGHT side of selector to open Set Up MENU.
3. Toggle up/down to find the Date and Time setup.
4. Toggle with the selector to highlight year, month, day, hour etc
5. When each item is highlighted toggle up or down to find correct number.
6. When all are set press MENU/OK again to exit.

These instructions are on the manual which is on the CD that came with the camera.

Press functionand then data registration,press set/ok and it will say user settings,press set/ok and it will say date and time,press set/ok and type in the correct date and time press set/ok and stop!To get the report press function and data registration and set/ok,use the arrow down and scroll to report settings,press set/ok and it will say tx report,press set/ok and use the arrowdown untill u get output yes!Press set/ok and stop!Enjoy!

Type everything in and then press OK. If its showing up on scan time then go to Add Funct-System-Date and Time. Make sure time zone is set correctly

It should be in 'settings' on your cell phone menu. Search around your phone. It could also be in 'organizer'. On my old one, it was in 'organizer', and once I went there, there was a 'set date and time' button. Here is the answer from the Vtech website: "Make sure the answering system is on. Press [Time/Set]. The system will announce the current clock setting, then announce "to set date and time, Press Time/Set". Press [Time/Set]. Press [Change] until the system announces the correct day, then press [Time/Set]. Press [Change] until the system announces the correct hour, then press [Time/Set]. Press [Change] until lthe system announces the correct minutes, then press [Time/set]. The system announces the current clock setting. Note: You can press and hold [Change] to advance the mninutes in increments of ten. "

In case you haven't found the solution yet. This is it.
Move buttons to "Print" and "F"
Press CA key
Press % (set Key)
Press "time"
Press and hold down the % (set key) until the numbers come back and start flashing.
Put in the correct numbers.
Press % (set key) again and your done.
Hope this helps.
Linda

Set the date and time

1. 
   On the product control panel, press Setup (
   ).



2. 
   Press the Left ( ) or Right
   ( ) Arrow button to select Basic Setting , and then
   press OK .



3. 
   Press the Left ( ) or Right
   ( ) Arrow button to select Date and Time , and then
   press OK .



4. 
   After Enter
   date appears on the control panel display, use the keypad on the control
   panel to type the date in the correct two-digit format, MM-DD-YY (01-01-10).
   After entering the date, press OK .
   



5. 
   After Enter
   time appears on the control panel display, use the keypad on the control
   panel to type the time in the correct two-digit format, HH:MM (10:15), and then
   press the Right ( ) Arrow button
   to switch between AM and PM . After entering the time, press OK .