I have an older model Panasonic Digital phone stuck on DND

What is the model of the PBX It is done on the PBX through the phone not on the phone

I'm guessing that you didn't mention that the phone doesn't work, it must be in FWD mode. You can cancel CF, or get someone to go into 990 area 9 bit 3&4 and reverse the bits so it will be solid on FWD and flashing on DND.

Carl

What are the other phones? a 7730 is an analog PITS phone and requires 4 wires to make it work. If you connect it to a digital jack, the data lets it indicate key functions, but there is no voice, and that sounds like what you have. Try taking a 4 pin base cord and plugging directly into port 1 of the 816 and see if everything works. If it does, you have your answer.

In passing, the FWD/DND light will flash if there's a forward or DND condition on the phone. Dialing 7100# from the intercom will clear all FWD/DND conditions, as will pressing the button until nothing lights.

Your delephone reference doesn't mean anything to me.

Carl

It's supposed to be. That's what forwards unanswered calls to voice mail.

If you need more info, post back with your system model number and the voice mail model.

Carl

Panasonic KX t7730 call forwarding function to external party:
If you are using the Kx-TA624 pbx (TES 824 models) system, program your phone unit (t7730) as follows: lifet handset, press FWD/DND button, press 3, then the outside line access code, then phone number, then #, then return handset.
If you are using the kx-ta1232 (higher models) of pbx system (usually with 9 or more CO lines cabable, use the following command:
lift handset, press FWD/DND button, press 6, then the outside line access code, then telehone number, then # then return handset to cradle.

HI.


some info on your model.


Product Name : Panasonic KXT7630

Product Rating: 0 out of 5 (0 Rating ) Category: Home Telephone Brand: Panasonic Type: Digital corded handset Caller ID: Without Caller ID Ringtones: Standard ringtones Speakerphone: With speakerphone Number of handsets: 1 handset Messaging functions: No messaging supported






riz.

Not knowing what the phone is connected to, the basic Panasonic command for cancelling FWD/DND is 7100/*7100.

As to the ringing, if your phone doesn't start ringing, please post the model number of the cabinet.

Carl

Don't laugh. Push the button and read the display. It will either unset DND or CF :-).

The 7100 command is part of the sequence to cancel those features on most phone systems and 790 or 79# will reset the extension. Of course it may be different if you have a TDA or TAW box (*7100) or a KX-T xxx10 system.

Carl

Depending on how your system is programmed, you might be able to turn it off by pressing it. Otherwise, you might have to press it and dial a code number, which also can vary from one installation to another, but I would try "0"

Otherwise, it can be programatically corrected by your installer if the system got "stuck" or something.


We have a support package that allows us to make all the changes you need over the Internet for a flat annual fee. If you want your whole system to work properly and all changes to be made for you at a flat budget, call us at 877-236-8376.

You need to know which phone system you have. Your phone can be used on different Panasonic phone systems that are set up differently.