Failed upgrade a recent software upgrade to a plolycom 2200-67880-160 failed. the polycom now has all led's lit solid red.I can't get into any menu options to reboot

Constant red means it is set and ready to record messages after x amount of rings. Flashing red means you have a message.

Please always include the model number is such questions and I can find you a manual. Polycom has lots!

https://www.google.com/search?q=Polycom+phone+manual

..

Recheck all cables and ribbons joining boards.

The easiest way to fix this is to have use TFTPD32 and set the firmware in the default directory so that when the phone boots it gets its DHCP with Option 66 from the machine running TFTPD32 and automatically pulls the firmware

Yes you can.

Polycom Telepresence m100

https://support.polycom.com > personal-telepresence
Product Name Product Name & Notes, Software Download, Release Notes, Release Date. Polycom Telepresence m100 Version 1.0.7 Software · Release Notes (PDF).

• 
  

  Telepresence m100-Product Activation - Polycom Support

  https://support.polycom.com > products > user > t...
  PDF
  For single user product activation, go to License and Product Activation and click "SITE &. Activation / Upgrade". User enters account name and password, ...

The TV is on standby mode due to protection; some error in the board. If you have spare boards, try replacing it one by one, starting from display board.

Hi Genaro,

Blue led light lit solid and yellow led light flashes is an initial attempt of the set to re-light the lamp.Red led flashes and yellow led light solid means that the lamp won't light up that's why it only has sound without the picture.
Since you've replaced the lamp twice and still the symptoms persist, I suspected that the fault came from the ballast board and not on the lamp itself. If the ballast board gone to malfunction, there's no high voltage will produce to light up the lamp and will sensed by the processor and trigger the error code (Flashes/solid led light with color code).

To verify whether the ballast board is faulty or not, check if the lamp will lit by looking through the lamp door louvers at the rear of the cabinet upon turning on the set.
Please let me know what you will find to assist you further.

Jdvillanueva

Hello Edward,
This is a known issue with this product that requires a software upgrade to resolve. Please download "SoundStation2W Software Upgrade" from the Product Support page of our website and follow the included instructions. If you need any assistance please don't hesitate to call for assistance at 1-888-248-4143 Options 2, 4.

Regards,
James

LED Indicators - LaCie 2big Network
The LED indicators above the drive bays and the front LED indicate drive status and activity.
During Startup

• Front LED – blinks red/blue until both disks are powered on, then turns solid blue.
• Rear LEDs – blinks red/blue until corresponding disk is powered on, then turns solid blue.

NOTE: If the device is not able to initiate the boot process following disk startup, the front is solid red.
During Bootup

• Front LED – solid blue
• Rear LEDs – solid blue

NOTE: If a disk is failing, both the disk’s corresponding rear LED and the front LED will be solid red.
During RAID Synchronization

• Front LED – solid red
• Rear LEDs – The LED corresponding to the original disk will be blinking blue and the one being synchronized is blinking red
• Once both disks are synchronized, their corresponding rear LED and the front LED will be solid blue.

I solved this issue with our Polycom by following the following instructions via the link below.

Upgrade phones with following software:
CVM: Version 1.61
All SoundStation2Ws with software CVM version 1.61 are susceptible to this failure mechanism and must be updated. To upgrade the software, please download theSoundStation2W Software Upgrade application and follow the detailed Software Upgrade Instructions located on the SoundStation2W support page. This issue only impacts the CVM version number listed above.

Requirements:

1. USB cable for the Polycom wireless unit
2. Windows XP machine
3. Download the instructions
4. Download the Firmware Update