E32 error message - Canon PowerShot A3100 IS Digital Camera

This is an Error message look on the Canon website for the list of error codes.

lens may be slightly experiencing a focus error . try cleaning the lens and contacts .

or set the switch to manual focus

I am sorry to say that the only way this is going to stop is to have your camera repaired !!! It requires service and there is no way around it.

From the Canon manual: "Error code E32 means the camera was dropped on concrete"

did you get a solution to this problem?

Its showing an error message. As its new take it back to the vendor and get them to sort it out, replace it or give you a refund. Its still under warranty, you don't want to void the warranty by messing about with it.

I think you mean an ER-A450T. Try pressing 1 then CASH# button (usually next to the JOURNAL FEED button. Not the CA/AT button)
------------------------------------------------------------------------------------------------------
If anyone needs a Sharp ER-A450T manual, try this page:
http://the-checkout-tech.com/manuals/cashregisters/Sharp6.php

Just bought a Canon SX210, I can take only a couple of shots before the Camera gives Camera error E32 and shuts down, this is a consistent. Any hints?

E32 indicates a problem with the pressure sensor. The service manual says to check the wiring (replace if bad), replace the sensor, if problems persist, replace the main circuit board.

There's a copy of the service manual inside the machine - remove two screws in the back and take off the top. The manual includes the error codes and the steps to take.