Question about Zebra Eltron LP 2824 Thermal Printer

Open Question

I have a zebra model 2722 it is printing the same label repeatedly

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: Zebra LP2844 printer prints garbage

Sounds like you might be using a bad driver, or the printer is in dump mode.
Try hitting the green button and see if it says exiting dump.
If still having trouble, inside the printer it tells you that if you are having printing trouble:

  1. turn off the printer
  2. Hold down the feed button
  3. turn on the printer and at the third red flash release the feed button
  4. it will then feed some pagessome info and ask you to hit feed again to exit dump
  5. hit feed again and it will say exiting dump
This process re-reads the label length (so only do it with the labels you want to use in, or it will waste labels until you do it again with those in it) - but I'm suggesting it only because it enters and exits dump mode (which I have read can cause the garbage when you try to print).

Posted on Mar 11, 2009

Ad
  • 62 Answers

SOURCE: An extra, blank label prints from a Zebra 2746e.

Check media settings in the printer driver. Check version of printer driver. Zebra printersuse an internal printer driver with their Zebra Designer software (Zdesigner driver) or a ZUD (Zebra Universal Driver) for other windows applications. These drivers can be downloaded directly from the zebra website.

Alternatively you can download the seagull scientific driver and use that instead. (used with bartender program)

Label skipping occurs if the media dimensions are not specified correctly. The important ones are label height, and media setting for type of media.

Perform a media calibration before you go changing settings. Power on printer, Hold top and bottom buttons in on control panel for 5 seconds, release bottom button only then when printer starts feeding labels release top button. When printer finishes press feed button.

Posted on Apr 18, 2009

  • 1 Answer

SOURCE: ZEBRA TLP 2824 LABEL MAKER PROBLEMS

I've had this problem. I changed the margins and it solved it.

Posted on Jun 09, 2009

  • 31 Answers

SOURCE: Zebra 2746e will skip leaving a blank label while printing.

You need to calibrate. Hold down the feed key while powering the printer on, then let go. The printer will calibrate, print a config label, then fo into dump mode. Press the fee key again to go out of dump. Of your issue persists, there could be a problem with yoru media, or with the commands that you are sending to the printer.

Posted on Jan 31, 2010

  • 1 Answer

SOURCE: print spooler resends data if long delay between labels zebra

We are considering different print drivers. Zebra's tech support is horrible and staffed with lazy, blundering idiots.

Posted on Apr 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is the text printing on Zebra LP 2844-Z label incorrectly spaced?


Zebra printers are not really made to print PDF files, if the only option is PDF I'd recommend switching to print on a laser. Also open the PDF and see if they are correct in the original doc

Oct 06, 2015 | Zebra Office Equipment & Supplies

1 Answer

Zebra 105sl printer labels print too small


There are 3 different DPI Printheads for Zebra printers if you print a label set up for a 200 DPI Printhead on a printer with a 300 DPI Printhead installed it will be about 66% of the size.

Feb 13, 2014 | Zebra 105SL Thermal Label Printer

1 Answer

I am trying to print a label on the zebra 105SL but the font and the "text boxes" are printing too large like it is zoomed out - how do I resolve this issue?


I am trying to print a label on the zebra 105SL but the font ...

www.fixya.com/support/t5406223-am_trying_print_label_zebra_105sl
Jul 11, 2010 - I am trying to print a label on the zebra 105SL but the font and the "text boxes" are printing too large like it is zoomed out - how do I resolve this ...

db:: 4.67::Crystal Report Label Won't Send To Zebra k9

www.hivmr.com/db/k99xad9dfspspddfs1scm9fzxxkdz9dj
My routine can print the label to any other laser printer, but the Zebra. ... I am tryingto find a way to print actual time a smartform label gets printed out on a zebra ... In this i want to changeCross Tab expert Row Label Font,Cross Tab expert ..... And labelpaper too. ..... DB:2.73:Zebra 105sl And Crystal Report Label Issues 1d.

db:: 5.16::Help My printer is printing in 3x5 documents and I ...

www.hivmr.com/db/xkzpajp81937ap7zdf87sdmsxmcm179m
DB:4.06:Printing 3x5 Continuous Feed Labels On Hp Officejet 6100 d8 ... Are they toosmall? ... I want to help you but I am not sure I can be of much help until I know what kind ... If the paper size is 3.5x5 but you are trying to print a 3x5 photo (which seems to be ...... I have a label format issue on a Zebra 105SL label printer.

db:: 4.15::Custom label sizes md - Hivmr


Jul 11, 2010 | Office Equipment & Supplies

1 Answer

Label alignment


see if you can download from here: http://www.zebra.com/id/zebra/na/en/index/resource_library/manuals.results.html

Z4MPlus Users guide is the fourth one down.

Mar 12, 2010 | Zebra Z4Mplus Label Printer

1 Answer

Hi, My printer model is TLP 2844.i m facing the problem in printing. The printer is hang after one or two lines printing and red LED are ON and I press Green button repeat same as before. Please solve my...


Solid red light. This indicates the printer is in an error state and will not print until the error is cleared. Check to make sure the printer is not out of labels or out of ribbon if it is a TLP model.
A solid red light will occur if
  • the printer is out of labels
  • the printer is out of ribbon ( TLP models only )
  • the printhead is open, not latched down all the way. Press down on the top cover of the printer to see if the error light clears and goes to green.
  • the ribbon spool is slipping on the ribbon spool holder on TLP models:
These 2 links will help you troubleshoot the problem:

https://support.zebra.com/cpws/docs/eltron/2844/28x4_rib_det.htm


https://support.zebra.com/cpws/docs/eltron/2844/2844_tsguide.htm


Click on this link. Or copy and paste it into your browser.
If I could be of further assistance, let me know.
If this solves your issue, please be kind to rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Mar 15, 2009 | Zebra TLP 2844-Z Thermal Label Printer

1 Answer

When printing more then 10 labels from Acrobat some of them are missing


Hello!
Dear
I need ur assistance about this types of Model TLP-2844,LP-2844,S4M,S-600,105SL,110xiii,140xiiiPlus,Z4M,Z4MPlus,How can I Install a Printer With Label and Ribbon?Can U help me regarding this problem?I am waiting for ur assistance.If possible please send me a video file about how to Install a Zebra Printer with label and Ribbon.

Dec 13, 2007 | Zebra Z4Mplus Label Printer

Not finding what you are looking for?
Zebra Eltron LP 2824 Thermal Printer Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zebra Office Equipment & Supplies Experts

Gateway information...

Level 2 Expert

252 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Zebra Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...