D-Link DAP-1522 Xtreme N Duo Wireless Bridge/Access Point (DAP-1522/B) Pre-802.11n Logo

Related Topics:

A
Anonymous Posted on Jan 18, 2014

Cannot config dap-1360 - D-Link DAP-1522 Xtreme N Duo Wireless Bridge/Access Point (DAP-1522/B) Pre-802.11n

4 Related Answers

puertobori

Doctor PC

  • 7733 Answers
  • Posted on Jan 21, 2011

SOURCE: i can't configure my dap-1360

There a great article at General Router Setup.
If you need more help post back!
Thumbs and testimonial are welcome!

Ad

Robert Lissor

  • 263 Answers
  • Posted on Aug 17, 2011

SOURCE: CAN GET INTO MY ACCES

The web based setup is 192.168.0.50 ,If you have securty on it you will have enter it or do a rest by pushin the reset button 15-30 seconds

puertobori

Doctor PC

  • 7733 Answers
  • Posted on Apr 11, 2012

SOURCE: access webpage 192.168.0.50 for the dlink DAP-1360 range extender

YES.ALL YOU NEED IS TO LOG IN THE ROUTER UI AND SET IT,

Anonymous

  • 10 Answers
  • Posted on Oct 12, 2012

SOURCE: Router can't detect DAP 1360 when installed about 90 meters away. UTP connectors tested okay.

have you tried turning on and off the router and AP? it would scan again...it looks like you just need to recheck connections and powers...

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Configure dap-1360 range extender

I THINK you are asking about a D-LINK dap-1360 range extender IF so see THIS YOUTUBE:
How to Configure Link DAP 1360 Wireless Range Extender

Be SURE to see this:
dap 1360 range extender Google Search

And this one too...

DAP 1360 Configure as repeater
NOT in English but lots in life is not... You can STILL see his setup steps clearly!

Anthony

0helpful
1answer

Unable save setting dap-1360 (this feature has been disabled on this emulator)

This is the manual for this wireless access point from dlink.

http://www.dlink.com.br/sites/default/files/product_download/DAP-1360_A1_Manual_v1.00.pdf

The error message should not mention emulators, return it to where you bought it, as it sounds as if the firmware version is not correct.
0helpful
1answer

Why i can not go to sit for configure DAP-1360

Go to this link http://support.dlink.com/ProductInfo.aspx?m=DAP-1360 and download the user manual for your DAP-1360. Configure it in the WISP mode following the manuals instructions.
0helpful
1answer

Dap 1360

1- first distance between Dap-1360 from the router wifi Nilox should be max the signal length around 50 meter,
2- try to update the Dap-1360 software from the internet then test the network cable again and the electric cable..
hope it help ...
0helpful
1answer

JE NE PEUX PAS INSTALER DAP 1360

Access D-Link's support-site: ftp://ftp2.dlink.com/PRODUCTS/DAP-1360/

Choose 'REV. A' or 'REV. B' or 'REV.C'.

Download the instructions for your router.
0helpful
1answer

How to configure Dlink DAP-1360 wireless N Range

Is this the router that is currently connected to your network, and also the router that is providing you with internet right now? what would you like to setup?
0helpful
1answer

Router can't detect DAP 1360 when installed about 90 meters away. UTP connectors tested okay.

have you tried turning on and off the router and AP? it would scan again...it looks like you just need to recheck connections and powers...
0helpful
1answer

Dap-1360 pin

It is printed on the bottom of the router.
0helpful
1answer

I cant get into config my dap1360 by typein in the dlinkap or 192.168.0.50

just make sure that you belong with in the same IP range.
default DAP-1360 IP is 192.168.0.50
username : admin password : <blank>
change your PC IP address to 192.168.0.xxx (e.g. 192.168.0.2)
from there you may choose wizard or manual configuration.
you may change your DAP-1360 IP add according to your network settings in the office and you must change you PC IP address with in the same range.
15helpful
1answer

I just got a dap-1360 and i cant set it up when i type dlinkap or 192.168.0.50 in my URL it keeps sayin webpage cannot be found

just make sure that you belong with in the same IP range.
default DAP-1360 IP is 192.168.0.50
username : admin password :
change your PC IP address to 192.168.0.xxx (e.g. 192.168.0.2)
from there you may choose wizard or manual configuration.
you may change your DAP-1360 IP add according to your network settings in the office and you must change you PC IP address with in the same range.
Not finding what you are looking for?

58 views

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

ExpressFiX
ExpressFiX

Level 2 Expert

691 Answers

k24674

Level 3 Expert

8093 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...