Talkswitch 480 VS no longer shows caller ID Simply "out of area".Can this be repaired?

my htc smart phone caller id always on .I want it off right now.Plese help me......

Caller ID information is sent after the first full ring. If the call is answered too soon, the caller ID information may not have been sent yet. Some of the many and varied networks do not send caller ID information. In this case you may notice that caller ID is missing only on calls from certain callers. Occasionally bad data is sent, causing your phone to reject it.

You need to make sure you have programmed your area code...check the manual for setting up caller ID. You can search for the manual on line...go to Retrevo.com

http://www.retrevo.com/support/Sony-IT-M602-Telephones-manual/id/751bh629/t/2/

Log into your TalkSwitch Management Software.
Go to Telephone Lines.
Under each incoming line make sure that Caller ID is checked.
Click File> Save
Hopefully this will fix it for you.

Log into your TalkSwitch Management Software.
Go to Telephone Lines.
Under each incoming line make sure that Caller ID is checked.
Click File> Save
Hopefully this will fix it for you.

Log into your TalkSwitch Management Software.
Go to Telephone Lines.
Under each incoming line make sure that Caller ID is checked.
Click File> Save
Hopefully this will fix it for you.

To setup the phone to automatically insert your external dial group (usually '0') before numbers, so you can save them in your phone book, and make calls from your missed / received call logs, you should check the TS400 manual.
For the TS350i you do this 1) press transfer/menu button 2) Press 4 - Call preferences menu 3) Press 8 - Access Code Prefix 4) Enter the number you use for outgoing calls (usually 0) 5) Press OK

If your phone has caller ID capabilities it should register when the call comes in. To prove your phone is good try it on a circuit that has verified caller ID. Have you paid for the caller ID option,if you have, the phone company may have neglected to turn it on. Thank you. Jer

probably your phone have a incompatible call ID system (probably FSK), and your line is DTMF. Needs a standard converter, from DTMF to FSK.