How do I remove the hard drive from my xerox 4150

Try this Link:

Perform an On Demand Image Overwrite Xerox WorkCentre 4150


How To Remove Hard Drive From Xerox Phaser 4510

First off you can only use a hard drive intended for the copier. Also when you put in the new one you will need the firmware fro the copier. THis has to come from Xerox. If you ordered the HHD from them it may already have it on them.

That is in fact a bad fuser which must be replaced (part# 126N00321 for 110v). Replacing it is simple, open the right door and remove the 4 screws that hold in the fuser. Make sure the machine has been off for awhile because the fuser my be hot. Here is a video that shows you how. Hope it helps, and thanks for using fixya
">

Here is a link to all the available parts and supplies for the Xerox 4150. This includes part number, yields and even pictures.
http://www.precisionroller.com/search.php?q=xerox+4150

Good Luck and Thank You for using Fixya.

This one probably relates to a failing CMOS battery 105N02093. First, though, you can unplug this battery for 30 seconds and try again. This is an inexpensive part, so start with the battery.
It could also be a defective hard drive 005N01086 or Main board 140N63141.

Whit
Item, Inc

You will either have to take off the back cover and remove the memory battery. One of those round lithium batteries and reinstall it or go to xerox.com, download the newest level of firmware and load it to the machine.
You may also want to try turning the machine off. unplugging the hard drive and see if it works like that.If it works without the hard drive replace it. If all those steps do not work replace the main board.

please do not do this if you are not xerox trained. you could use a damp cloth to wipe the entire glass

hi,cleared misfeed sheet & clean sensors.send me result.

bad hard drive or firmware call service to reload

Sorry I didnt see your post a while back.
You shold call and have the firmware updated on that machine.
There are several firmware updates to the 4150 that resolve a lot of problems with the machine/.