Redial, transfer buttons

If you entered them in system speed dial then you'll need to enterpgogramming on either extension 10 or 11. Enter programming by pressing feature 00,then press feature and the number of the speed dial bank (600-699), then enter in the number you want to over write. press feature 00 when finished.

If your trying to change one of the one touch buttons on the set itsself then press feature 00, press the button you want to change, then enter in the new telephone number. prsss feature 00 to exit programming.

Program feature 03 call waiting for recall.

Feature 05 for LNR. Redial.

Feature 00 press an unused button if it has something assigned to it press the mic button and press the button again to assign the code. Or just remember the code and use it. The feature button is just that when you use up buttons.

If your changing the speed dial numbers under the individual buttons thats done by pressing feature 00, the button you want to change the speed dial number on, and enter in the new number.
If your changing the system wide speed dial numbers, From extension 10 enter in feature 00, press feature then the 3 digit code for the speed dial bank (600-699), then enter in the new telephone number. Either press feature and the next 3 digit code for the next number or press feature 00 if finished.

2 line caller id is offered on newer versions of software. On earlier versions a call id name button is used to toggle between the clid name and number.
To program a button on your set press feature 00, press a button you wish to program as clid name,
and press feature 16, press feature 00 to exit programming. Press the button to toggle from clid number to clid name

You need to press 0 at the voicemail login prompt. If you dont have a button programmed you can dial Intercom-7-7-7. If the system is configured properly you will get the login prompt. You can then dial 0# for the admin login. The default password is 1234#

It is not possible to diable the speaker phone but you can use the HFAI / Mute button to mute or unmute the spk. By default the spker phone is muted. Hope this helps.

AT EXTENSION 10 OR 11:

FEATURE 00
LEFT INTERCOM TWICE
#103
ENTER TIME AS 4 DIGITS, 24 HOUR MILITARY FORMAT
FEATURE 00

Go here http://support.avaya.com/elmodocs2/partner_acs/r7/518457701_2.pdf

Press "feature" 0 0 next press the left intercom button 2 times then press #103 (do this from extension 10 or 11)

enter the new time in 24 hour notation....ie 2:15 would be 1415 then exit programming by pressing "feature" 0 0 again.

Hope this helps.

Press
Feature 00
Left Intercom Twice
Dial #103
Enter Time in Military (14:05 = 2:05 PM)
Feature 00