2wire 802.11g wireless adapter freezes/crashes vista

Hi,

You should find compatible Vista drivers from the 2wire website by following this link http://support.2wire.com/index.php?page=download

Just remember to install the 2wire software before plugging the device in.

Hope this will help

Thanks

The Link im giving is for WIn 98,2000,XP etc and Vista.
Both Version of 2wire 802.11g USB Wireless Adapter Drivers are Here:http://www.youtube.com/watch?v=pgGovtiQp3g
Video Explains,Links you and comes with Installation Pdf manual.
Take care

check for compatibility. The 2wire wireless adapter might not be compatible with your vista 64 bit

change the channel. this is a common problem when wireless routers are broadcasting on the same channel and at times, some cordless phones will interfer as well.

good luck

If you are on windows vista it could be your driver. You can go into safe mode on the computer with F8 while the computer is starting up, then go to the control panel and device manager. Plug the adapter in and remove the driver for it. Download a new driver at http://support.2wire.com/index.php?page=download and install it.

REALTEK RTL8187 Wireless LAN Driver

I would suggest increasing the wireless power on your router or change the wireless channel.

If your computer keeps losing the signal, you need to either change the wireless channel or boost your wireless power on your router. Sometimes even a combination of both is needed so you stop losing signal.

Are you using the same security as the others?
Make sure the the security key is exactly the same as the others.
Also check the firewall settings

If you go to the 2Wire site you will see that only 3 of the seven adapter products listed there have Vista drivers.
http://www.2wire.com/?p=331

If you have one of the Vista supported products, make sure you have the Vista driver.

If you do not, get one that is.