Question about Nostalgia Electrics KPM200 Kettle Popcorn Maker

Open Question

Rubber wheel on kettle doesn't meet rubber wheel on unit properly so kettle tips while cooking

Inside the kettle is a piece that rotates the popcorn kernels. In order for it to turn the ridged rubber wheels on the kettle and unit must meet to turn the piece inside the kettle. They don't properly meet so the kettle tips. This was first time trying to use this xmas gift my grandson received.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Kettle Keeps jolting out of place

Popcorn popper is approximately three weeks old and now the popcorn clogs up in the hopper (cooker pot), the gear quits turning, and we have to pry the popcorn out. It worked perfectly when we first got it and now it is nothing but a pain to use. We tried several popcorns, cooking oils and amounts of oils, but the problem continues. I noticed the small spring located on the lower shaft doesn't cover the entire shaft. Is it supposed to be longer? Your prompt reply for a solution would be greatly appreciated or we will have to return the unit to our local retailer where we purchased it.

Posted on Jan 11, 2008

Ad
  • 22 Answers

SOURCE: need popcorn popper kettle for ccp-509 popper

For anybody needing parts for Nostalgia Electrics popcorn makers please call 920-347-9122. Nostalgia Electrics is no longer part of The Helman Group.

Posted on May 15, 2009

  • 22 Answers

SOURCE: popcorn jamming in kettle

The only real solution is to put less kernels in kettle - it pops so fast that it jams up and burns. Adding a little more oil usually helps as well.

Posted on May 15, 2009

  • 58 Answers

SOURCE: need new cord that plugs into kernal kettle.

The CCP-510BLK will use the same parts as the red CCP-510. For replacement parts, try calling Nostalgia Electrics at 920-347-9122.

Posted on Oct 30, 2009

  • 30 Answers

SOURCE: Popcorn kettle not heating up

You can call Nostalgia Products at 920-347-9122. They are open Monday thru Friday 8-5 CST.

Posted on Oct 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do you know where the kettle fuse is located.


All kettles have a thermostat inside the kettle between the cooking surface and the outer jacket of the kettle.

only true commercial machines have parts that are serviceable.

Mar 12, 2015 | Kitchen Appliances - Others

1 Answer

How to fix this problem?


See if the gear at the top of the kettle rod is "jumping" and not allowing tehe stirrer to rotate properly. In my machine, this was caused by a broken black guide at the atop the two gears. The guide is screwed into place. It allows the gear to slide in and out as you rotate the kettle, but it also has to prevent the rod from moving back and forth or the gears will slip

Sep 13, 2012 | Nostalgia Electrics Helman Group CCP-509...

1 Answer

I DO NOT HAVE COOKING INSTRUCTIONS FOR MY KPM-508 POPCORN POPPER


The instructions say make sure kettle motor is plugged in. Turn unit ON with switch on crown of machine. Allow unit to run for 3-5 minutes to heat up kettle. Turn unit off. Add 2 teaspoons of your favorite popcorn cooking oil to the kettle. Then add 1/4 cup of popcorn kernels to the kettle. Turn the unit on and close the door. When popping sound slows down turn the unit OFF. Flip the kettle over with the crank handle to empty the kettle. Repeat process until desired amount of popcorn has been popped.

Jun 09, 2011 | Nostalgia Electrics Helman Group KPM-508...

4 Answers

The popcorn gets stuck in the kettle until it burns


I have a Popcorn machine from Nostalgia too that had this problem. I cleaned it out and everything but it still had the problem of the it getting stuck. After days of analizing, I found the solution. after a while the ceiling of the popcorn machine starts to fall in, lowering the handles of where the kettle goes. making the knob that turns being lower that the one that makes it turn, causing it to get stuck, all I did is add so leverage so the kettle is once again at the same level or higher. Making it turn with greater force and not getting stuck. In other words make sure the turning mechanism is leveled and not one lower than the other. preferably the kettle part being higher.

Jan 09, 2011 | Nostalgia Electrics Helman Group CCP-509...

1 Answer

I have checked ground wire/ kettle conections/no bare wires, what


u have a live wire making cntact with kettle inside of unit, unplug, open and check connections

May 22, 2010 | Kitchen Appliances - Others

1 Answer

The palstic piece at the top of the machine..CCP-550


Just call Nostalgia Products at 920-347-9122. Tell them you need a retainer plate. You will need the Date Code from the back of the machine.

Sep 21, 2009 | Nostalgia Electrics CCP-509 Popcorn Maker

1 Answer

Popcorn maker jams up - burns kernels


Please call Nostalgia electrics at 1-920-347-9122 so we can help you get the piece you need.

Nov 25, 2008 | Bond Helman Old-Fashioned Movie Time...

1 Answer

Popcorn maker


When Popper Has Popped Corn Just Before.
1. Pour the properly measure amount of Oil into the kettle.
2. Wait about 45 seconds - or until the Oil in the kettle starts to smoke slightly.
3. Pour the contents of the properly measured corn cup (kernels plus popcorn salt or Flavacol) into the kettle.
4. Wait about 2 1/2 minutes. If you are using a pan on the stove without an agitator, you must constantly shake gently. When the crackling noise of the popping corn is no longer heard, dump the kettle and empty it completely.
5. Repeat if needed for more popcorn.
6. When you are finished popping, turn off the kettle agitator switch (if you have one) and turn off the Pilot light/ heat switch.
7. After the machine has cooled enough so as not to be dangerously hot, wipe the outside of the kettle with a soft damp cloth. This helps prevent a heavy build-up of the Oil.

TIPS
- Bagged floss keeps a day or two, depending on the humidity
- Use bags to make and display cotton candy in advance - use cones for immediate sales
- Unless you're experienced, it's best to turn off the motor to refill the spinner head
- If machine will be used more than 20ft. from power source, be sure to have an adequate extension cord

Nov 18, 2007 | West Bend 01568 Popcorn Maker

2 Answers

Kettle Keeps jolting out of place


Popcorn popper is approximately three weeks old and now the popcorn clogs up in the hopper (cooker pot), the gear quits turning, and we have to pry the popcorn out. It worked perfectly when we first got it and now it is nothing but a pain to use. We tried several popcorns, cooking oils and amounts of oils, but the problem continues. I noticed the small spring located on the lower shaft doesn't cover the entire shaft. Is it supposed to be longer? Your prompt reply for a solution would be greatly appreciated or we will have to return the unit to our local retailer where we purchased it.

Aug 05, 2007 | Nostalgia Electrics CCP-509 Popcorn Maker

Not finding what you are looking for?
Nostalgia Electrics KPM200 Kettle Popcorn Maker Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nostalgia Electrics Kitchen Appliances - Others Experts

Sheldon Dedek

Level 3 Expert

909 Answers

ray gallant
ray gallant

Level 3 Expert

61926 Answers

Gil Shultz

Level 3 Expert

3382 Answers

Are you a Nostalgia Electrics Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...