My ge easycam is all fuzzy and i caant seem to focus it

Hi

Please install and try to this driver, click the mention mention below link

http://www.opendrivers.com/driver/2142086/jasco-ge-98063-easycam-driver-free-download.html

You may have to reload the software - does it have a focus ring around the lens you can rotate to sharpen the image ?

Software and manuals here

http://jascoasia.com/support/software-downloads.asp#pccams

Try focusing the camera by rotating the lens Left or Right. This usually is the problem. Hope this helps. Bud

If you know where the fly back is, ok open the casing and see at the back of the fly back, there are two knobs, one for the focus and the other is for the brightness. Try twist both and see which one is for the focus. Ok, from the focus knob try adjusting until the fuzzy sight disappears. Try this, I usually do it to screens with blurry appearances.

Fund my old GA Easycam Webcam. Dont have a Instalation (lost). Pleace Help!

Tis is an ongoing problem I seen increase alot over the past few months. From what I can gather, all the channels being broadcast over going from the analog to digital, there's no big suprise to anyone. However, the change from analog to digital is changing at a faster rate, so when you look at the TV some channels will be fine and others will have grey lines, fuzzy picture. The only solution-you need a TV with some kind of digital tuner. On the TV itself if the (TV has one) it will say "SD" or "ED" which stands for standard digital or enhanced digital.

Ge Easycam Driver try a new driver

just bought the easycam pro but can't connect to another computer that has the easycam pro. both computers say that there is a problem with the other computer. Where do we start?

you should goto to device manager and updat driver this should fix this.

VISTA DRIVERS Sorry but I searched everywhere but it seems your product's manufacturer has no recent driver for it in Vista.