Repair manual lid does not close

If you're having trouble closing the lid on your Opal coffee machine, here are a few things you can try:
1. Check for any obstructions: Make sure there are no coffee grounds or other debris stuck in the lid or the surrounding area. Clean the lid and wipe away any residue that might be preventing it from closing properly.
2. Align the lid properly: Sometimes, the lid may not align properly with the machine, preventing it from closing. Take a close look at the lid and the corresponding opening on the machine. Ensure that the lid is positioned correctly and aligns with the opening. Try gently pressing down on different parts of the lid to see if it helps with alignment.
3. Apply gentle pressure: In some cases, the lid might require a bit of force to close properly. Apply gentle pressure to the lid while attempting to close it. Be careful not to use excessive force as it may damage the machine.
4. Consult the user manual: If you're still unable to close the lid, refer to the user manual provided with your Opal coffee machine. The manual might have specific instructions or troubleshooting tips for lid-related issues.
5. Contact customer support: If none of the above steps work, it's recommended to reach out to the customer support or the manufacturer of the Opal coffee machine. They should be able to provide further assistance and guide you through the troubleshooting process or offer a possible solution.
Remember to exercise caution and refer to the manufacturer's instructions before attempting any repairs or adjustments to your coffee machine.

It sounds like you are having trouble getting the lid on your Maytag Bravo top-load washer to close properly, even after replacing the lid strike and the lid latch. There could be a few reasons for this issue:

1. The lid strike and latch are not properly aligned: Make sure that the lid strike and latch are properly aligned and that the strike is lined up correctly with the latch.
2. The lid strike is not adjusted correctly: The lid strike may need to be adjusted in order to properly engage the latch. Check the installation instructions for the strike to see if there are any adjustment instructions.
3. The lid latch is in lock mode: Some Maytag Bravo top-load washers have a lock mode that prevents the lid from being opened during a wash cycle. Make sure that the latch is not in lock mode by checking the owner's manual for instructions on how to unlock the latch.
4. The lid strike or latch are defective: If you've tried the above steps and the lid still won't close, the new strike or latch may be defective. It's recommended to contact the manufacturer for further assistance or to contact a professional technician for repair.

It's important to make sure that the lid is closed properly before starting a wash cycle to prevent water from leaking out of the washer.

Occasionally some folks who live way out in the country really need the washing machine but have no access to repair parts, so here is a "trick" that might temporarily solve your problem.
The lid switch is often rectangular, and has a wire that plugs in to each end of it.
With the machine unplugged, remove the wires from the switch and plug them in to each other, then wrap them well with electrical tape. Fasten them in such a way that they will not touch the drum or other parts, and then try the machine.
You have "told" the machine the lid is closed.
Of course, now the machine is DANGEROUS to use because when you lift the lid, it will continue to run through it's cycle.
God bless your efforts.

retry reopen & close the door 3-4 times

The lid is a little bit rusty that it does not close properly making the lid switch to be inoperative. I suggest you should try to clean and derust the lid and make sure that the lid switch is actuated when you close the lid. I have to warn you though that these items are usually powder coated so you will have to be good in repairing powder coated items.

I think you should buy repair manual first for your vehicle after that it will be easy for you to solve the problem. Check the link may be you will find something useful here Mercedes Benz CL CLK Maybach SL Class Complete Workshop Service Repair...

LO error code:

Locked: Lid has failed to unlock -

the machine has repeatedly tried to

unlock the lid. Push lid closed to

make sure nothing from the inside is

pressing against the lid, preventing

unlocking.

Is that the issue? Have the Lid locks failed to release and you can't open the Lid?

Or have the Lid Locks released so you can open the washer lid but the error code LO remains?

If you want to DIY I will help you.

Google this Neptune TL Washer FAV6800AWW

This is a DIY Appliance repair forum no cost and you can get the Service Manual from this site.

In the Sticky: Neptune TL Washer FAV6800AWW 5 post down you will find a link to the Service Manual. You absolutely need the Service Manual to DIY issues with the machine. It's not the best SM but will get you started. I also have repair post in that sticky to help with the most common issues with the machine.

In that Sticky are other what I find to be common Service Repair notes for issues with the machine.

If you need help post in the Maytag/Magic Chef/Admiral/Jenn-Air forum with your issue and we will try to help. No cost to you for the support..........D*ick

The lid has to be closed for agitate and spin. The lid switch is loose or defective.
Open the control console to retrieve the mini service manual.
Follow the steps to access the lid switch and repair.

There is a plastic "finger" that is attached to the lid that would normally close the switch when you close the lid. Is it still on the lid? If not, you can go to the sears web site for repair parts. You will need your model number.
Good luck.
Regards,