Craftsman 42 in. Deck 19.5hp Lawn Tractor Logo
Posted on May 26, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Turns left sharply, barely turne right

Yard machines rider turns left tightly, barely turns right. How do I fix

1 Answer

rjivaro

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Novelist:

An expert who has written 50 answers of more than 400 characters.

Governor:

An expert whose answer got voted for 20 times.

  • Expert 158 Answers
  • Posted on May 26, 2009
rjivaro
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Novelist:

An expert who has written 50 answers of more than 400 characters.

Governor:

An expert whose answer got voted for 20 times.

Joined: Apr 20, 2009
Answers
158
Questions
0
Helped
74396
Points
390

The problem is either that there isn't enough range on the steering gear in the right direction, enough length on the steering drive rod (going to one front wheel), or a bent tierod (connecting the 2 front wheels) or worn tierod bushings.

Most likely is the tierod. I do not like how these are designed so for my own tractors I make one using tierod ends available from tractor supply company, grade 8 bolts and steel tube with a 3/4" inside diameter. A bit of measuring and welding later the steering is better than new.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

I have a toro 3150Q greens mower When turning tight right the wheel on the right stops and goes into a neutral position. When turning tight left the wheel on the left wants to keep driving. Help?

I would suspect the right wheel motor is barely working (or not at all) and forward motion is from the left only so any attempt to turn left is problematic since the right wheel motor has little or no power. If you can get all wheels off the ground you can test and compare wheel motors.
May 02, 2019 • Toro Garden
0helpful
2answers

Singer sewing machine model number 337 troubleshooting

Appears to be an older mechanical machine. Could be a belt is shot or possibly the machine has seized due to old oil that has dried. Seizing is very common in older machines that have not been cleaned and oiled regularly. AVOID trying to run the machine until you can address the problem. It could burn up the motor or break some parts. You can try repairing it yourself or take it for service.

Wheel on right side that controls the needle up and down is very tight...
0helpful
1answer

Toro rider is running to fast wont idle down

Check your idle screw and make sure it is not turned all the way in to the right. If turning to the left will not idle it down, then maybe the governor spring is to tight, or the tab that the spring connects to on one end is bent making the spring to tight. If so just bend it the opposite way. Hope this helps?
Nov 06, 2013 • Garden
0helpful
1answer

2004 trailblazer HARD TO TURN

check power steering pump --fluid level and operation ==also check the steering rack
2helpful
1answer

Hello I have a toro zero turn rider z4220 I think I bought it new about 2 to 3yrs ago when I was putting it up last winter the left drive would not go forward or reverse then shortly there after the right...

Hello, W/D here.

Look for a transmission disconnect rod, usually at the back of the tractor, about even with the top of the gearbox. If it has been moved to the out position, the transmission will not operate from the seat, but you can push it.

Good luck, --W/D--
7helpful
2answers

We have 42'' Yard Man riding lawn mower need to how to change oil

it's a square head pipe plug @ base of eng. either right or left side of machine may also have a quik change fitting instead its black plastic w/ yellow cap
0helpful
1answer

My yard machine snowthrower wont start

when it just wont start you might want to try checking to see if you get a spark, if that is OK then try rebulding the carb. that usually fixes the problem...good luck but don't forget.. turn the ajustment screw all the way in (not tight) then back it back out 1 full turn. after it starts fine tune it from there..good luck
0helpful
1answer

Suburban K1500 steering concern

the steerign gear was not centered when istalled. need to remove and count the total lock to lock revolutions and recenter the gear and reinstall
Not finding what you are looking for?

609 views

Ask a Question

Usually answered in minutes!

Top Craftsman Garden Experts

john h

Level 3 Expert

29494 Answers

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Craftsman Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...