Need instructions on programing Radio Shack Pro 94

You may need to RESET your PRO-2043 before it will perform properly for you. You can find instructions for the RESET procedure and programming instructions here:

http://support.radioshack.com/support_electronics/doc38/38419.htm

Bill B.
Listening in since the 60's

Another really nice scanner from Radio Shack, just a little complicated if you don't have a manual. Go to this website from Radio Reference and you can find what you need.
http://wiki.radioreference.com/index.php/Pro-94

No telling what he did, but if you've tried deleting his entries and the scanner is still locked up, you'll need to reset it. This procedure will clear all the information you have have stored in the scanner.
1. Turn the scanner OFF.
2. While holding down the 2 and 9 keys, turn the scanner ON. CLEAR will flash for about 5 seconds while the scanner clears its memory.
NOTE: Do not turn the scanner OFF until CLEAR stops flashing.

Need the operating manual for your scanner? You can download;/print it here:

http://support.radioshack.com/support_electronics/doc61/61426.pdf

Bill B

The cable works with many PRO-series scanners, and is still available from Radio Shack. Here's a link to their catalog page:

http://www.radioshack.com/product/index.jsp?productId=2177609&cp

Here you go...

http://support.radioshack.com/support_electronics/57321.htm

You can get the owner's manual for your scanner by clicking HERE

have fun...

YES I DO

Good Day,

See this link for all available documentation:

http://support.radioshack.com/productinfo/DocumentResults.asp?sku_id=17-6020&Name=Pagers&Reuse=N

Hope this helps

Rat Shack say they will load your scanner at no charge . The program is called Scan Cat I think .You can get the program on the net .Every Rat Shack has the program on the store computers . The 94 is not a bad scanner .Hope this helps .

User Manuals are here;

http://support.radioshack.com/productinfo/DocumentResults.asp?sku_id=20-413&Name=Radio%20Scanners&Reuse=N





Best of Luck.