DIGISOL DG-BR4015N DRIVER - D-Link ADSL2/2+ Modem/Wireless Router 4-Port Switch, 802.11g, QoS (DSL-2640B)

How to reset Digisol ..

https://www.youtube.com/watch?v=rhQxE3i21Bg

You need a device-driver for the Ethernet adapter inside your computer. Then, use an Ethernet cable to connect from your Ethernet port to one of the 'LAN' ports on the router.

You do not normally need drivers as they are "built in" as firmware.

i didnt find the 8 digit pin number anywhere on the router of DIGISOL DG-BG4100N, please help me if u know dat number...

try a fact resest should be a pin set hole in the back take a pin/paperclip tooth pick Press & Hold for 10 sec that should reset rotuer to factory defaults. That may help if not unplug router from power & unplug wan ethernet or unscrew wan coax for 30 sec if that still dont work call your internet service provider they can do remote reboots that may help

Login into 192.168.2.1 it will ask you for username and password default username is admin and password is password here click on wizard-> wireless-> WPS there you will be able to find AP pin

already have a driver attach in modem.is no updated driver because hardware dependent. so sent service center updated your modem hardware then update driver from service center it only for u worked ( it's not joke). or" buy updated modem.

Here are all the Panasonic blink codes.
1 blink STV 5v sense DG Board

2 blinks 15v SOS D Board

3 blinks 3.3v SOS D Board

4 blinks Power SOS P Board

5 blinks 5v SOS D Board

6 blinks Driver SOS 1 SU / SD / SC Boards
(SC energy recovery circuit)

7 blinks Driver SOS 2 SU / SD / SS Boards
(SC floating voltage area)

8 blinks Driver SOS 3 SS Board
(SS energy recovery circuit)

9 blinks Panel Config. SOS

10 blinks Sub 5v SOS / Main 3v SOS DG Board
DTV 9v SOS / Tuner Power SOS

11 blinks Fan SOS PB Board

12 blinks Sound SOS H Board

13 blinks Communication error DG Board
with IC8001 (Pesks Lite 2)























7 blinks Driver SOS 2 SU / SD / SS Boards
(SC floating voltage area)

8 blinks Driver SOS 3 SS Board
(SS energy recovery circuit)

9 blinks Panel Config. SOS

10 blinks Sub 5v SOS / Main 3v SOS DG Board
DTV 9v SOS / Tuner Power SOS

11 blinks Fan SOS PB Board

12 blinks Sound SOS H Board

13 blinks Communication error DG Board
with IC8001 (Pesks Lite 2)

check the manufactues web site