Three beeps when I push cycle start, but washer won't start. Checked breakers, pulled plug and re-inserted plug, still won't start.
Thank you for your inquiry, friend!
I see that you are having trouble with your Frigidaire washer not starting. This sounds like a possible problem with your control panel or keypad. You may need to disassemble the washer in order to pinpoint the possible problem this is not a simple DIY job. I would recommend seeking assistance from a professional technician for proper diagnosis and repair. This will help you avoid future issues as well as possible multiple part purchases. I hope this information is helpful. -Matt
SOURCE: error code "loc" on GLTF2940ES0 washer
turn the selector knob so the machine comes on then press the "options" and "select" bottons at the same time for 3 seconds.
SOURCE: LTF2140ES0 washer just beeps three times, wont start
Frigidaire engineers are so smart they programmed it to beep 3 times for door lock problem, draining problem and other problems in the internal electronics and didn't bother to give the users specific info to read off the machine.
SOURCE: frigidaire front load washer will not start
You need a new front controller board part # el1347360
SOURCE: during any cycle washer will stop and beep and
i believe that code is water related not getting enough water maybe drain hose is too far down drain and unit is siphoning
SOURCE: When I turn on my Frigidaire Affinity washer, ERR
I have the same problem and i was curious if you have found a solution.
Thanks
498 views
Usually answered in minutes!
did you ever get an answer to your problem? i am having the same problem.
×