Hooking a PC to your laptop's screen

Could be the pixal setting on the tower is too high for the TV? Can you change the video card settings to the TV Pixal rating? You could have a bad video card. Good luck.

Try hooking it through a HDMI cable . This is what I use to connect my laptop to my plasma .

The sticks only allow 1 connection. You need an access point. Like the Spot or Hub.

Either your monitor died or your video card/chip died. Test your tower with a different monitor or test your monitor with a different tower.

it means that the monitor is not receiving any signal from the cpu, check the cable that goes from the tower (cpu) to the monitor

Hi:
The most likely cause is the LCD panel is damaged, but you should verify that the laptop works ok, by hooking up an external monitor and see if you have a good display on it. If so, your laptop is worth fixing. A new LCD panel is approx $100 + installation, so it is probably worth fixing!

hi ,
please contact Dell
this is the link to there international support page
http://support.euro.dell.com/support/topics/topic.aspx/emea/shared/support/dellcare/en/international_travel?c=uk&cs=ukdhs1&l=en&s=dhs

try hooking up external monitor see if it works

The screen resolution on your data projector may not be able to display the screen resolution set by your laptop.
Adjust your laptop's screen resolution say 1024X768 first then adjust it up or down to see the effect.
You can do this from the Control Panel - Display - Settings. There is no need to reboot the laptop for the settings to take place.

yes you can all you need to do is hook up your usb modem to a computer or laptop and hook a ethernet cord to your computer to ur 360 note- hooking a usb modem in a 360 will not work. ive had mine hooked up 24/7 to halo3 it works wonderful may glitch once in a blue moon but its better than hughes net never ever ever ever get hughes net get verison!!!!